开云体育

Hi James. I loosened the top screws and removed the bottom nuts. That's let's me tilt the bracket far enough to mount the gas spring, but I can't get the spring to compress back down so I can't get

hi jeff, i am still here, i could not board my flight because my covid test report did not spell out the test name. i will need another test and pay $400 change fee on the ticket and try again next

I think the string was looped around the studs in the top and bottom, might have even beed a separate loop of string around the studs and then the long string between the two loops. It’s been so

let’s see if this works

it is near me in indianapolis. for some reason the pic from website is not coming thru. i will try a separate response as the edit window is not bringing photo option in the menu in top. imran

Just surfed the site..? Clicked on a random? item? no information found on item's location.? That's kind of odd, I should think.

well i posted the auction but since i only have today to decide, thought i repost with a better subject heading. so here are the diff models available in this auction. would appreciate if anyone knows

Gerald, I can't reproduce where I got that from so sorry.? Its on the internet somewhere.? He's obviously not the same Nick Moore Youtube guy.? AvE speaks a completely different vernacular.

stumbled onto this on facebook. auction ends monday morning. i am tempted to pickup a wilton VS drill press. if you download the app you can go thru much faster and search as well.

Thanks everyone for the feedback. I think I’m leaning towards the saw-shaper combo as some have pointed out getting access from both sides. ?The machine width is similar but the B3 can stay against

Jonathan, Correct, template routing does not need a power feeder. I should have stated that. James wrote:

That totally depends on what you do. If you use the shaper for template work with a guide bearing a PF does not help you. With proper jigs and holding you can perfectly do without a power feeder

Referring to James comment re “only using a router spindle” etc, I beg to differ I have had my Felder gear for 15 years now, very happy traveler. I do have the router spindle and I have a Felder

Thank you Colin. I will look tomorrow and see what kind of mount. I am pretty sure it is the face mount you have described. Now knowing the belt should not be overly tight, I may actually be in

Gary, not sure if Felder has changed motor mount from face to foot mount, if it is still face mount then motor gets its movement up and down by way of slots cut into machine body once 4 retaining

Are you saying that AvE’s secret identity is Nick Moore? As far as I have been able to tell AvE has gone to great lengths to remain anonymous.

Does anyone in FOG currently or previously work for Felder? Specifically in the US as a field sales rep? I’m considering a change in careers and would appreciate a little insight from the inside.

Jeff, I assume you are asking me. Loosen the bolts circled and the lower nuts in the following pictures, That let the bracket lift up enough to attach the shock. Then tighten it back down. There is no

I've mounted the bottom of the bracket such that I need to compress it about an inch. How much did you need to compress the felder has spring?? I'm thinking that even if I can rotate the bracket up

Thanks. I'm having trouble visualizing how to tie the spring down in a way that the string won't slip off and also won't block the top and bottom mounting holes.