开云体育

Curious as why you would need/want to have this? I use a height gauge for setting dado blade height its quick and easy. Well maybe not quite as fast as built in gauge. Would some sort of aftermarket

Thanks for the info David D, Did not know Michael was still around, he is very particular and been making his fences for a long time. I wouldn’t hesitate to buy his products. time true and tested.

Hi Joel, Make darn sure the seller tightens all handles and be sure to check before you unload if and handle is not locked they are a very unstable load and could end up on the ground. Mac,,,

ACM makes two series, the lighter Star series are sized 400,500,600 etc. The heavier series ( the one you want ) are sized 440,540,640,740 etc. Centauro has always made saws sized similar to the Star

John, curious the vintage of your FB600, and it if was made by ACM, or is a Felder clone. As for the blade guide support post, I have seen a couple of iterations of the design that clamps that post in

Thanks for confirming what I thought, all the it’s not a precise machine, lack of understanding that column needs to be parallel and plumb was confusing me, but to be fair it’s easy for me to get

Actually the Bandsaw can be turned into an extremely precise machine which most of us doing resawing have achieved. I get less than .002" difference from top to bottom of a typical 8" to 12" resaw

Liam, Very nice. What kind of projects will you use the AD951 to make? Joe in New Orleans

?Sweet, you will be glad you got the segmented pressure bar (or whatever the hell they call it) no squealing pig noise from the sheet steel pressure shoe Regards, Mark

Thats pretty slick Murry. Regards, Mark

So there is no way to adjust/shim the guide column? I thought I saw that it could be done on an mm20, of course different saw but I assumed it would be that way on any of the larger bandsaws. Glad I

Arrived Thursday, it’s really quite a machine, very impressive. Cheers, Liam

Thanks for the replies lads, will take a look later. Guessed it was probably something I had done wrong. Thanks again.

Below is a picture of my home-made overhead guard. I was mainly motivated by dust extraction, I recently upgraded to an AF 160 and with the main dust hose attached to the saw it has heaps of extra

I have a Hammer N4400 that I purchased a long time ago. When I started for the first time it had a nasty vibration, a coin balanced on it would immediately dance and fall over within a couple of

I totally agree with James. Felder is not best of breed when it comes to bandsaws. Seek out an Italian alternative. Felder used to OEM the ACM, but no longer does so. The more you tighten this knob,

I don't own a bandsaw yet but seems like the wheel does not spin fast enough to cause a vibration. Is it in sync with the wheel speed? Anyway, a tire shop will have lead weights with a sticky back

If ACM is now the supplier of the MM saws, the Felder industrial line sourced from ACM is the same. I believe Laguna's larger saws are still ACM too although it takes some courage to deal with Laguna.

I just do not see how to adjust the parallelism of the post on FB510 which is really a simple machine, nothing fancy. It does cut straight when the blade is properly installed, and the blade makes

So you are saying that the Felder fb510 is not a precision machine and since that is the case the guide should not be parallel to the blade or be able to be adjusted parallel to the blade? Regards,