开云体育

Isn't there a little fuse on the bottom of the saw under the power switch? Dave [felder-woodworking] <felder-woodworking@...> wrote:

I’ve got a 2005 CF741SP with the 7.5 HP 3-phase motors hooked up to a PhasePerfect converter. I’ve been using it for years in the same configuration. Everything was functioning normally as I

Hello all, Since we remodel kitchens, here's our typical setup. Juno cans for area lighting, dependent on ceiling slope, counter, island, vent hood layout. Pendants over islands, under cabinet led's.

Brian- The kitchen/house is a Mediterranean style and will be traditional cabinets and quartz countertops. The 9ft ceiling-drywall only one window over the sink. Preference is warm lighting but

I used 7-zip to archive and split the PDF files. Manuals for the KF700 and AD941/AD951 are now posted in the Manuals directory in the Files area. There are also instructions for how to download and

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the felder-woodworking group. File : /Manuals/About 7z Files Uploaded by : mstuber

Brian, I came across ththis lucifer zero sightline cans when i was doing research on low profile IC rated Led's. I also came across i think it was Pure Lightings strip LED light that as you stated

That is a really big topic to try and fit into 25 words or less. Price no object is an interesting wrinkle as well. Super modern or traditional? Why don't you guys formulate some questions, but

I know of no setup issues with the Profil related to the Bowmould. As to the fence, I used a piece of hard maple with a cutout for the bit. I fastened the maple to the fence with the same screws that

When I asked my sales guy to email me the KF700sp manual before delivery, he said the files are too big to be sent via email. He said I can get it when I go to their office. I have not been in their

I would like to hear what you think of the Musclechuck when you get it, It might be a workable option. I will look at Sommerfeld bits as its time to start a new collection, mine are older than dirt

I tried posting the manual to the files section, but it exceeds Yahoo's 1990's limit of 10 MB. Unfortunately, it doesn't compress either. I did manage to post the parts manual though, in case you want

Hi Bill This makes total sense to me now that I remember setting a bit hand tight to the height I needed and the after tightening down it was off. I am really questioning the high speed spindle for

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the felder-woodworking group. File : /Manuals/700 Series Parts Manual (vers 10_2005).pdf

I have one on order as well. I'll send you an email with the manual shortly. To: "felder-woodworking@..." <felder-woodworking@...> Sent: Wednesday, January 25, 2017 7:25 PM

I would like to get one too for the machines I have on order, I am sure there is a lot of reading I could be doing ahead of time to learn what to expect when they come G

I have a KF700S Professional on order. Does anyone know where I can get a PDF version of the manual. I asked my sales person a week ago and haven't heard back. Jay

Gary's if memory serves me right the whole shaper fence mechanism tips up on an angle. By doing this could you use an aftermarket fence adapted to the hole pattern. Also for you or anyone that uses

David, Nice! I recalled I have seen it on your website somewhere before. I do not have the router spindle. This is a lovely router system plus the MuscleChuck, and sliding table/crosscut fence with

OK, just couldn’t resist this blast from the past. I posted a document in the files section on how to adapt a fixed-base handheld router to the shaper spindle recess on the KF700 and F700 machines.