HI,
I have a 2000 C3-31, a combnation machine. I love that machine, but the rip fence and the mitre gauge were not usable, at all, I replaced both.
If you have a similar machine the fence rail primary attachment is to the joiner table, so it detaches from a support point near the blade and rotates past vertical when you flip up the forward joiner bed to convert to thickness planing.
Does this sound familar? If so I can walk you through my conversion which works great.
I feel that a Unifence, IF you can find one of these discontinued fences, is perfect for the upgrade.
Brian(J)
