Re: [felder-woodworking] Install gas spring assistance for the tilt-away bracket for KF700
|
Just to clarify, I paid 1100 each and 92 Designing and building for 50 years
toggle quoted message
Show quoted text
On Apr 18, 2025, at 10:21?AM, mac campshure via groups.io <mac512002@...> wrote:
? I have two of these power feeder mounts I will sell one for $ 1,100.00 us only plus shipping ups gr? Mounting base is cast-iron machine 6 in.? with 7 1/2 inches in opening Unit is 8 inches wide by 7 x 11¡± tall 3/8 inch or 10 mm roll plate. Screw is 1 inch or 25 mm. Hand wheel is 8 inches in diameter moves up and down like nothing. Just crank your power feeder in or out got both holes in the back of it for standoffs or mounting it however you want this is not a toy serious machine tool stuff. If you¡¯re interested, contact me off the fog. This is what I paid for them. In 1992. Best mac
<IMG_6532.jpeg> <IMG_6531.jpeg>
Designing and building for 50 years On Apr 17, 2025, at 12:29?PM, Ron Pomeroy via groups.io <rpomeroy@...> wrote:
? Hi David
?
I just tried installing a Comatic DS700 (smart stand) to my KF700 with the flip-away bracket.
?
The usable width on the Felder supplied flip away bracket is only around 5¡± while that flange at the base is 6.7¡± (the hole pattern is fine).
?
Kyle at shopgearinc claims the standard base is 7¡± wide - wider than the heavy duty smart stand.
?
Seems unlikely I¡¯m the first to even encounter this. ?Have you run into any of this?
?
Thanks in Advance,
?
Ron
?
|
