Doug,
?
We had the same issue with my SCM s640p, which is and ACM saw.? It is just under 8 feet tall and originally I was putting it in my garage shop with a 7' tall door and 9' ceilings.? My son and I used a appliance dolly with a 45 degree support to get it off the trailer.? It still would not fit under the height of the door.? We almost killed ourselves lowering it to get under the door.? I wished I would have filmed it for comedy on YT.? We got it stood up and off the pallet it was on.? Fast forward 18 months and I had to move it into the new shop.? The new shop has an 8' door and 10' ceilings, so much easier.? But we still had to lay down the saw to get it out of the old garage shop.? We took off the table (decent removal of weight) and laid it down onto a furniture dolly with some straps to use to hold on to the spine of the saw at it went down.? I then used some triangles I made out of 2x4;s to keep it upright.? This was much easier.
?
When we got it into the shop we decided to try and brute force it upright.? My son and I are not weight lifters, I think my son is like 145 pounds.? We got it upright.? The moving straps really helped to give us some leverage.
?
Good luck!
?
PK
PK