Re: Bowmouldmaster Install Issue
|
toggle quoted message
Show quoted text
On Oct 27, 2024, at 10:34?AM, Imran Malik <imranindiana@...> wrote:
?Hi David, Thanks for the reference. It never fails, I looked through the index (obviously not carefully enough) and the section 7 in survival guide before asking the question. Completely missed the installation provided in Section 10 ??¡á? The great survival guide has all the answers if you are smart enough to look carefully. I will report if the webbing is any different than survival guide on my 2002 KF700. Imran Malik On Oct 27, 2024, at 10:11?AM, David P. Best via groups.io <dbestworkshop@...> wrote: ?Imran - from page 226 in the Survival Guide - ?this would be for ?KF700, but the F700 is similar. ?Trunion bolts only exist on pre-X-Roll type machines which I believe is what you have. ?Check the webbing positions on the underside of the cast iron top before drilling - you don¡¯t want to drill into the webs : <BowmouldMaster.jpg> If you plan on using tooling with the BowmouldMaster in conjunction with the sliding table and a crosscut fence, then I would not recommend rotating the template. ?Better to drill two sets if necessary to get the full position flexibility of the hood. ?I often use the BowmouldMaster with counter-profile tooling and a crosscut fence because the dust extraction is so much better with that hood. ? David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best
|
imran