Mac,
Thankfully you told me about negative hook angle blades when I got my Northfield Unipoint. ?The Unipoint made a great cutoff saw, was very smooth and never bogged down.
toggle quoted message
Show quoted text
On Sep 15, 2024, at 9:53?AM, Airtight: Clamps by Air Compression via groups.io <airtightclamps@...> wrote:
Joe,
Rebuilt my first 94 d in 75 they swing in parallelogram straight line.They require a negative rake saw blade I have an 18¡± leitz on saw so 5.5¡± cut off capacity.s people in Ohio They probably had a positive rake and poorly set up.?
Any blade over top should be zip to negative few degrees.
The 94 d weights close to 2000# 7.5 hp 3600 direct motor drive.
This is not ?a set up for the average person?
You need mill wright ?skills ,,,lots going on .
I consider the saw very safe as saws go?
So you can just set material against fence were you want ?
Not holding and slam it through !!
I have a clamp on it just cause I can!
I bought this saw in 2002 and and finally got it up and running couple months ago.
Built dust shoot with phenolic inserts so dust is captured of the tip and up the blow pipe .?
Maya stops are finest bar none supper heavy duty very precise And quick to set .
?Mac,,
martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330?cell
Designing and building for 50 years
