When I had my Felder engineer here for my Hammer C3 31 he had several tips regarding the jointer beds, maybe it will be of use for you:
- If you have to replace the cutter head and need to start all over, start with the infeed bed and align it to the cutter head not the other way around
- Only if you have your infeed bed aligned to the cutter head, then align the outfeed bed
- I also took some notes while he was talking back then:
- The planer outfeed bed needs to be 0.04mm lower then the highest point of the cutter head
- At the thicknesser table, the infeed roller needs to be 0.9mm under the lowest point of the cutter head, the outfeed roller 0.3mm lower then the lowest point of the cutter head
Have you made any progress in the meantime?
