¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Single Messages Topics Expanded Polls

Re: Adjusting C3-41 jointer beds? #hammer #jpsetup #jointerplaner

 

This is what tech support sent to me. The tech indicated that 36 was the macro adjustment and the hinge screws were micro adjustment.? Even after loosing the 4 bolts below the hinge and making adjustments to #36 there was no discernible change.?


On Sat, Mar 4, 2023 at 5:22 PM Andy via <andy.raynor08=[email protected]> wrote:
US. I¡¯ll be back in the shop on Monday. I took all the plates off so it should be pretty easy to get to.?

On Sat, Mar 4, 2023 at 4:30 PM rodsheridan <riderofgallifrey@...> wrote:
There are quantity 3 item 20, and 1 item 17 on each end of the hinge.

You can move the pivot rod up/down using one pair of 17/20, that¡¯s how you change the hinge side alignment.

#24 is only used when the above does not have enough range.

What country do you live in?

Join [email protected] to automatically receive all group messages.