Re: Newest Splinter tongue design for non-DRO fences
|
toggle quoted message
Show quoted text
On Tue, Jan 11, 2022 at 08:30 Bill Belanger < Bill@...> wrote: What should the final dimension be Erwin? I don¡¯t have a saw to test it on. Should the step be the same length as the DRO model Brian? Thanks? Bill Belanger Yes I printed mine and found it was about one half inch tooo short of the blade.?? I will half to glue on and addition.?? Elwin ? Sent from for Windows ? ? You all might want to measure from the end of the fence extrusion to the blade first, seems some folks are saying their unit is not 1 5/8¡±, so that might have to vary. ? ? Bill: ?Add me in for a couple; I will pass on the fingers addition and am not picky on the color as long as it is a ¡°perfect¡± Felder green (just joshing on the color).? Terry
On Jan 10, 2022, at 4:26 PM, Brian Lamb <blamb11@...> wrote: ? I printed in PLA as it¡¯s what I have and I don¡¯t see it being an issue. You could do PETG, Nylon and carbon fiber filled, but I don¡¯t see any advantage to any of those. I have a LED light mount I printed for my CNC mill about 3 or 4 years ago, it¡¯s still working despite being sprayed with coolant and covered in chips all the time, just used PLA on it as well. ? ? What plastic type do you recommend printing it in?
?
?
?
|
Bill Belanger