Re: Newest Splinter tongue design for non-DRO fences
|
Does it not work to print them long and let the saw cut off the excess so one size fits all?? Dave
toggle quoted message
Show quoted text
If you want to measure as best you can to the blade, I can create the STL files for different lengths, the 1 5/8¡± would be too long by David Best measurements, but obviously not all machines are the same. If we could
get a consensus of the dimension, I can post different STL files for different lengths. That way you aren¡¯t trying to glue or screw extensions on.
This is why I didn¡¯t want to get involved in printing them for folks¡. :-)
Yes I printed mine and found it was about one half inch tooo short of the blade.?? I will half to glue on and addition.???
Elwin
?
Sent from??for Windows
?
From:?Brian Lamb
Sent:?January 10, 2022 6:58 PM
To:?[email protected]
Subject:?Re: [FOG] Newest Splinter tongue design for non-DRO fences
?
You all might want to measure from the end of the fence extrusion to the blade first, seems some folks are saying their unit is not 1 5/8¡±, so that might have to vary.
?
?
Bill: ?Add me in for a couple; I will pass on the fingers addition and am not picky on the color as long as it is a ¡°perfect¡± Felder green (just joshing on the color). ?Terry
On Jan 10, 2022, at 4:26 PM, Brian Lamb < blamb11@...> wrote:
?
I printed in PLA as it¡¯s what I have and I don¡¯t see it being an issue. You could do PETG, Nylon and carbon fiber filled, but I don¡¯t see any advantage to any of those. I have a LED light mount I printed for my CNC mill about 3 or 4 years ago, it¡¯s still working
despite being sprayed with coolant and covered in chips all the time, just used PLA on it as well.
?
?
What plastic type do you recommend printing it in??
?
?
?
<5EF86A8BD4054A9491998681EF925C82.png>
|
