Re: Omga Miter Saw (230v 3ph), can it be connected to a Festool Vac with auto start?
|
Have you measured the kerf vs the teeth on a couple of blades to test under power and load?? My 16" saws typically will measure .002-.006 wider than the teeth with the arbor flange trued.? Machines with self aligning bearings won't run true until under speed
although I'd
?be surprised if Omga used those.? If the kerf is more than a few thou wider than the teeth, something is wrong.? Dave
toggle quoted message
Show quoted text
Got the Omga but was curious what you all think about the runout. ?See pictures.
|
