¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Single Messages Topics Expanded Polls

Re: What Grease to use for Saw Height/Elevation Guide

 

Cliff,

Thanks for the details. Supposedly there is a grease fitting as the manual recommends using a grease gun. I have looked cursorily and not seen one. Will have to take a closer look in a day or two to see if I locate it.

Imran

On Jun 15, 2020, at 9:36 AM, Cliff Rohrabacher, Esq. <rohrabacher@...> wrote:

?I have tried oil, I have tried wipe on Red grease, I have used the
DowCorning dry lube with molybdenium disulfide (it is messy) and I have
used Lubriplate in a pressurized can.

My height adjustment rack is hard to access and no grease zerks exsist
That'd have been a nice thing to build in. If I ever take the saw town
I'll install some better way to get lube in.

So far I am favoring the Spray on Lubriplate. The long tube provided
with the can lets me get in and apply it with some relative precision.


On 6/13/20 2:32 PM, imranindiana via groups.io wrote:
K975 manual says to grease the saw height guide every 40 hrs or monthly. It
does not mention/recommend a grease type. I have grease for the shaper
spindle in the gun. I forget what it is but it was recommended here and I
got it from NAPA store. Is it okay to use for the saw height?

Imran
Join [email protected] to automatically receive all group messages.