I have two of the Felder rebate heads noted by David ¡ª probably because of his recommendation in the Survival Guide. ?I have used them for tenons with no issues, although the will not drop below the table of my CF741 due to their diameter (220mm). ?I use a piece of ?¡± plywood as a tenoning plate to raise the stock and rebate heads.
An alternative, that appears to be less money with greater depth (99mm!) are the tenon plates from Whitehill:
toggle quoted message
Show quoted text
On May 27, 2020, at 1:07 PM, imranindiana via groups.io <imranindiana@...> wrote:
I have two of these and you can do 74mm deep cuts. Pretty close to 3¡±
Imran
On May 27, 2020, at 2:43 PM, Michael Todrin <michaeltodrin@...> wrote:
?I wanted to see if anyone knows the depth of cut available when using the Felder Adjustable Groover as a tenon cutter on the shaper? Here is the link to the exact itemhttps://us.feldershop.com/en-US/en-US/en-US/Sawing/Tongue-and-groove-cutters/Adjustable-Dado-Cutter-for-Saw-Unit-RB-HW-Adjustable-groover-12-0-20-0-mm.html
I have the 700 series shaper with the 230mm hood. Are there any other options for tenon cutters that will get me 3 inches or so of depth that you recommend?
Thanks
Michael
