¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Single Messages Topics Expanded Polls

Re: Adjustable Groover Item # 03.0.033 depth of cut

 

¿ªÔÆÌåÓý

Two of the following rebate cutters, with a bushing between them the thickness of the tenon you want, will go to 74mm depth, and 31mm high. ? These is what I use:


T-max on the dado cutter is not specified, but maximum depth of cut using it as a groover is 34mm because of the inner hub projection. ? See photos below:




David Best

https://www.instagram.com/davidpbest/





On May 27, 2020, at 11:42 AM, Michael Todrin <michaeltodrin@...> wrote:

I wanted to see if anyone knows the depth of cut available when using the Felder Adjustable Groover as a tenon cutter on the shaper? Here is the link to the exact itemhttps://us.feldershop.com/en-US/en-US/en-US/Sawing/Tongue-and-groove-cutters/Adjustable-Dado-Cutter-for-Saw-Unit-RB-HW-Adjustable-groover-12-0-20-0-mm.html

I have the 700 series shaper with the 230mm hood. Are there any other options for tenon cutters that will get me 3 inches or so of depth that you recommend?

Thanks

Michael

Join [email protected] to automatically receive all group messages.