Re: FS: '95 Eurovan Camper, 89k mi. (PA)
Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow! Ow!
At least it seems to have mostly missed the house. But, d*mn! Most
anybody can make a house!
Ow!
Paul in Pittsfield
By
Paul K Gloger
·
#103629
·
|
Re: Belly pan bolts
Sounds a little like Chrysler's claim about their van tailgates
popping open:
"There's absolutely nothing wrong with them -- but we've fixed it."
Paul in Pittsfield
humble
like
By
Paul K Gloger
·
#103628
·
|
Re: New EV owner looking for advice
--- Stephen Kramar <sgkramar@...> wrote:
IIRC on my '00 (so I guess the '93 might be different) there is nothing going through the glass.
It's all smooth on the outside.
By
gti_matt <gti_matt@...>
·
#103627
·
|
Voltmeter
Here is the information for a voltmeter that you can install in the
lighter plug or direct on the 12V line to verify the status of your
battery
http://store.schumachermart.com/bt-25.html
Bob or
By
Alain gravel <alain.gravel@...>
·
#103626
·
|
Re: Belly pan bolts
I was told.. "There were no bolts
holding it on, we had to put some there to keep it from falling off."
Thats so cool that the shop replaced the bolts for free and being so humble
and altruistic
By
forest flanigan <creoflan@...>
·
#103625
·
|
Re: looking for a REAR bench seat
Joel I have a nice one that is from an MV so it does fold into a bed. I would like $200 for it and that would include the rear cushion. I am located in Southern New Jersey about an hour from
By
kenwilfy
·
#103624
·
|
Re: Belly pan bolts
Thanks everyone.. I'm going back under this weekend. I'm pretty sure
the bolts got "lost" the last time I went to Jiffy Lube. I had used
them before when I had a different vehicle and had no
By
Jim
·
#103622
·
|
Re: timing my 93 mv
a
I timed at about 750 rpm at the btdc mark. The mark on the flywheel was skipping around
some, does that mean that the distributor is worn out?
turns
By
newfield4u <newfield@...>
·
#103621
·
|
Re: Rear Torsion Bar Loose
Garrett,
Aren't you referring to the rear "anti-sway" bars.
I suppose, in reality, they are a form of torsion bar.
Kent Kirkley
'97EVC
(with no rear anti-sway bar:)
****
Wondering what's
By
Kent Kirkley
·
#103623
·
|
How to remove power station fuses?
This is probably a dumb question, but how do you remove the power
station fuses to replace them or see if they are blown? I can't seem
to figure it out :(
Alon
By
alonfw2 <alonfw@...>
·
#103620
·
|
Re: Need Vent Cover
Just looked again and found the part at eurocampers--Thaks Pete.
Plus I went to the city today and found the thermocoupler for 17
bucks--Looks like the project is rolling along
Forest
By
forest flanigan <creoflan@...>
·
#103619
·
|
Re: Need Vent Cover
Thanks Boone I thought I saw them when I was there last year.
Pete I looked on the site and can't seem to find it --will look again when I
'm more awake--Thanks
Forest
By
forest flanigan <creoflan@...>
·
#103618
·
|
Rear Torsion Bar Loose
Hello,
It's probably time to bring this thread back up again.
I just bought my 2002 EVC recently and installed new Bilstien shocks
on all four corners. (Beautiful ride, by the way!) (I'll post a
By
Garrett Wilner
·
#103617
·
|
Re: Galley cover lifters
Removing the galley cover seems like a good idea, less weight, more
ventilation and visibility. However stepping on top of the galley
cover was a good way to get into the upstairs bed. I'm not sure
By
Robert Dalton
·
#103616
·
|
Re: What would be a good shop manual ?
AFAIK, Bentley is the the only real option. I have both the book
version (only covers 1992-1999) and the CD version (covers through
2003). I prefer the book because I keep it on the shelf in the
By
Stephen Kramar
·
#103615
·
|
Re: FS: '95 Eurovan Camper, 89k mi. (PA)
In ev_update@..., "The Bus Depot" <ron@...> wrote:
Yes, that was the one. In fact I plan to pull the remaining bit
By
The Bus Depot <ron@...>
·
#103614
·
|
Re: EVC Parts NEEDED and FOR SALE
Have you tried thise folks for the fridge part?
http://www.winnebagoparts.com/
By
tds3pete
·
#103613
·
|
Re: 2002 eurovan weekender burned up heated seat
I had a similar thing happen on my 'oo EVMV last year. I kept
smelling something burning while I was driving and then my back got
REALLY hot in one spot. Fortunately, it didn't burn a hole in
By
justthesells <justthesells@...>
·
#103612
·
|
Re: looking for a REAR bench seat
Here's one on theSamba:
http://tinyurl.com/6px66t
wrote:
By
tds3pete
·
#103611
·
|
looking for a REAR bench seat
volks,
I'm looking for a rear bench seat. Most importantly, it needs to be a
rear, not a middle seat; ie, it needs to seat three people. I would
prefer a grey, non-folding (like from a GL), but if
By
justthesells <justthesells@...>
·
#103610
·
|