开云体育

I appreciate the cautions, and I suppose it's possible that leaky injectors could do that, but seems more likely to be the evap system based on reading prior experiences about these symptoms. Also, I

As others have mentioned, it could be leaking fuel line or injectors. Get it checked immediately. At about 30k miles my '97 EVC had a couple fuel injectors replaced. The dealer tech did not install

+1 on the fuel injectors. Had that happen when the tech did the install wrong. Gas leaked to the ground.

It could also be a leaky vent hose. Leaking high pressure fuel lines or injectors are also possible.

what are the voltages i should expect on the 4 pin connector that connects to the ac pressure switch?? thanks

I have had that smell on a nonEV when one of the fuel injectors had a failed o ring I think mechanics have a tool that senses fuel odors to help track it down Stephen

once I had access to all the wires, it was obvious. thanks

My 2000 EVC has a strong raw gasoline smell after driving on a hot day at altitude after stopping. I've been unable to localize the smell precisely, but it's definitely raw gasoline (not unburnt from

Thanks all, much appreciated.

Hi all, Reporting back on my fix. I started out trying a PCV from a 2.8L VR6 Passat and couldn't get it to fit the space. So I tried Gundylake's approach using this PCV

Winnebago still sells them. It's for a 1993-2003 campervan table. I bought one 2 months ago. They make them to order so it takes about 3-weeks to get them. I believe It's one of these, depending on

Lichtsinn RV 1 mile outside the Winnebago factory sells the bracket for the table, I bought a couple two years ago there. Noel Twitter @biathlon1

Regarding the Eurovan's tables, does anyone know where similar hardware for attaching the table to the cabinet can be found? Thanks in advance!

ops It would be the filtered wire

Hi I know this was quite awhile ago but I am hoping you might answer a question. I am part way through the upgrade from the Magnatek? and I must be missing something ....what do I do with the second

Hi All, I brought my van to muffler shop. Someone attempted to steal the catalytic inverter but failed to complete the job. I may have interrupted him. The mechanic was able to weld it together.

I have replaced the Norcold in my 2003 EVC with a more efficient 12V-only fridge. The Norcold is in great (technical and cosmetic) condition and works well in all modes (LP, 12V, and 110V). I'll

Carl, might you be willing to upload your description + pics to the Files/Propane folder? ?That folder is pretty empty right now, and I think any description of LP regulator replacement would be a

Here's a bit of discussion on the BMV relay: https://community.victronenergy.com/questions/11062/using-the-bmv-712-to-switch-off-a-relay.html

@michael? ?If you have a BMV you want to check the manual about the relay/trigger circuit function - it puts out a 12V signal that you control with the software based on threshold settings in the