开云体育

I know that's been done quite a few times because there are a number of fairly late model (2001?) EVCs running around in just that condition. Some Seattle-based coffee company turned EVCs into mobile

Something is wrong with Dave's summary. A 4-wire sensor for the after-run pump? Wny? All it needs is an on/off switch, which would mean two-wire, not four. Dave, are you looking at wiring diagrams or

And the new green d-shaped (oval) sensor did the trick. The dash gauge is now working. Another note, I think the AC was not working while this sensor was malfunctioning. It seems to be working now.

If Mike was still here he would tell you that you are wrong, and to expect further problems in the future. I on the other hand, with real world experience, would say that it is true that the solder

--- foosnews <foosnews@...> wrote: it's been my experience that fluid they usually will let you bring in since people often have preferences w/fluids. parts generally no, however... 1. I have

That may have been it. I deburred the rim of the bushing with a large screwdriver and now it's in and the van is running. Thanks for the help! Steve http://EuroCampers.com 636-337-7700 888-797-5994 -

Elden - Glad you corrected the problem. I used Red & Black electrical tape to recode my front & rear exposed DC cables. When I was into my converter & rear breaker panel, I did the same. Of course,

I've replaced that bushing -- it's a sintered metal designed to hold lubricant and it's brittle -- and it can be difficult to R&R. Are you sure the new bushing is in all right? Any little chip will

I spent about 3 hours removing and attempting to reinstall a rebuilt start on my '93 automatic. Removal wasn't difficult, but I'm having trouble getting the rebuilt in place. I replaced the bushing,

--- In ev_update@..., "jack_son_73" <jackr1@...> wrote: > > Elden- > > Are you aware of the Winnie house wiring code > used on ALL of their added 12V DC EVC circuits? > Black = HOT = Plus.

Thanks to all that replied. When I saw the original post, I assumed it was an owner of a legitimate copy, merely selling his used version. Guess the price was too good to be true. Best, JW

Elden- Are you aware of the Winnie house wiring code used on ALL of their added 12V DC EVC circuits? Black = HOT = Plus. Green = Negative or Ground. This as been mentioned here, but keeps getting

I replaced my dead coach battery but when I connect the battery,the power converter clicks every 10 seconds and the lights flick but stay on.. ????? thanks,Elden

Jack, You don't need to be on line to use the Vag-Com, only to download the software and install it on your computer. It doesn't come with a disk. If you do have wi-fi, then you can look up lots of

Steve - Thanks for your input. I didn't know I was helping to support a pirated operation. Unfortunately, I've learned more about Vag Coms in the past 2 days than the past 2 years +. Personally, I'd

You can buy cables on ebay for $12.99. You used to be able to download a free version of Vagcom on their website that had limited capabilities. I have what seems to be an older full version that does

It sounds like this might be pirated stuff....that's not my style. I'm dropping out of this thread. Pete

Greetings friends, If you have already experienced a failed transmission on your Eurovan, what were the first few signs of failure? Hesitating once in gear....like when you accelerate from a red

Stuart & Pete - I used the term "key" in error. I had just upgraded an A-V program, which required a "key". Mike's dongle does have the chip - I stand corrected. Pete, I was glad to hear of your happy

We have the two mufflers and pipes that are associated with them made by a company called Ernst. This is a German company and the stuff I get from them is always top notch. Usually aluminized steel so