开云体育

https://www.bks-tuning.com/7d0906515.html It's also possible that you could adapt a similar N80 valve from another VW or Audi model. They likely only differ in terms of connector, mounting, or hose

My mechanic cannot find this part.Can someone point me to where I can find this part?. Thanks in advance. Malcolm Stebbins 2002 EuroVan camper: N80 Canister Purge Solenoid- Part #7D0906515

I have seen ECU requests go by in this group from time to time, here is an organization specializing in ECU repairs. <https://www.youtube.com/user/SpecializedECURepair>

If you are getting that ground to positive, then I am betting that the injector is toast. You can check resistance of the injectors at the harness connection near the fuel pressure regulator. I have

If you do it, change them all.? It's not hard but it's a lot of motions.? Might as well go over the cooling system and secondary air while you're in there.? The best tip I can offer is to remove

Yes, it’s the original and ending with the two letters ‘AC’ not ‘AD’ as I thought before. I took a look at it with a mirror and a little flashlight. So I was able to read the model number on

Agreed. Don’t think you can change a TCM part number. It is possible?that is just a revision difference.? Not sure why you think it should be changed in the first place. Is it the original?

You’re right Duane and I have been mistaken. I was pretty sure my TCM was ending with the letters AD but I took a look yesterday by removing the carpet near the driver’s ‘A’ pillar and, with

Hi Steve, Curiously, I was just watching a video on Youtube about how to change a bad injector from an EVC. Mine is a 1997 bought in 2012 and it began to throw a P0305 code since a couple of months. I

Hi All, We have a 1997 EVC owned since 2001 with 120,000 miles. I'm getting a cylinder 3 fuel injector short to positive. Anybody have experience changing out injectors? I'm pretty good working on

I'm pretty sure that VCDS just reads whatever is programmed into the module at the factory or repair shop.? As far as I know, there's no way to change it with VCDS though.? That info is used for the

Hi all, Well, the other day, I did a scan with VCDS-Lite on my '97EVC. I noticed in the (02) TRANSMISSION MODULE that the code number of my TCM was not indicated correctly. In fact, it was detected

Hi Yves, We have a 1997 EVC and it has a cable controlled throttle body. Be well. Steve

Hi Alex, Ok, I think I found it !! It’s 098 for realigning the throttle body.... Btw, I have the Ross Tech-Lite software and cable and I’m just begining Learning that thing. Seems hard to learn

Alex, So what group what it be for realigning the throttle body on my ’97 ? It’s not 092 ? Yves Envoyé à partir de Courrier pour Windows Envoyé le?:27 ao?t 2021 02:22 ??:

Hi Yves! Yes our ‘97 appears to be driven by cable according to eEuroparts: https://www.eeuroparts.com/Parts/64236/Throttle-Body-With-Sensor-021133064A/ Also looking at VCDS, group 060 is

Hi, I'd like to know if the throttle body on a '97EVC is driven by cable ? I have to realign it and I want to make sure of what group to look on the vcds to do that !!? I have the choice between 092

I'm not really the group authority, but been here a while. I think private selling is ok.? Probable consensus is that nobody wants people/bizs turning this board into a spammy ad group.

I have original headlights from '02 Eurovan/ Rialta...one lens looks to have small chip..otherwise they both worked... Sent from my Verizon, Samsung Galaxy smartphone Get Outlook for

The kit has been sold. I guess the answer to my original question is that it is OK to post things for sale. Paul