Well 9 hours into the cruise control installation we have gotten back the
high beams, the horn, and the flasher.
The problem was absolutely filthy contacts and interior on the donor cruise
control arm and switch. You can't believe how small these bits will come
apart after cleaning the heck of a bunch of this stuff it works.
The only problem we are left with the cruise control doesn't work. The
cruise switch has been tested extensively for continuity and function, from
the switch to the stock, to wiring harness to the loom.
The vacuum pump works when we apply power to it, and the pump generates
suction. The problem is you can't bench test stuff that only goes active
at 30 kmh or faster.
The remaining questions are:
1. Can anyone fax me the pages from Bentley on troubleshooting the cruise
system?
2. I would like a list of the relays by position and number from a vehicle
with auto, air, cruise. Alternately if you know what position the
relay(s) or relay for cruise is I would like to know what the relay # is
and the position I should find it in.
Reg
phone or fax 780-459-0813.
