Re: should I add wire to door harness repair

Spencer Allen All Messages By This Member #164796 One thing some of us found years ago is that the loom is tie wrapped to a bracket just inside the cab. Thanks Duane I heard others have just clip the tie wrap and let it hang. I'll see if one is needed when I do the install at fuse panel. Dumb question but do Germans use a metric wire gauge? I was going to use 18 GA for the small wires but some are even smaller, more like 20ga but not 22. I've already spliced in one wire using 18ga. Seems pretty close to me. Spencer toggle quoted message Show quoted text On Fri, Sep 20, 2024 at 3:03?PM Duane via <txpigeon=[email protected]> wrote: On Fri, Sep 20, 2024 at 01:08 PM, Spencer Allen wrote: I figured adding about 4" to the bigger wires might relieve some of the acute bending as they seem to be the most affected by the pinch. Whatever you can do to prevent bending will help.? One thing some of us found years ago is that the loom is tie wrapped to a bracket just inside the cab.? That causes it to bend instead of 'float' in and out. -- Duane 05HD Rialta 227K Miles

Join [email protected] to automatically receive all group messages.

开云体育