If compressor is not running, ? What is the pressure ?
Check switch on top tank on fire wall pass side, pull plug and check, there should be voltage on one side and other side to compressor clutch.
toggle quoted message
Show quoted text
On Jul 30, 2022, at 10:36 AM, B Feddish via groups.io <bfeddish@...> wrote:
?
The compressor is not turning on at all. ?The pressure is fine, I checked it. ?1 resistor it turns out is bad, a new one is coming Monday. ?Not sure if the bad resistor keeps the compressor from coming on. ?I don’t know what the next diagnostic step is…
Thanks,
Bryan?
On Saturday, July 30, 2022, 11:15 AM, mike.mcauliffe@... <99mcbear@...> wrote:
Usually one or both of the fan resistors (for the two fans you have) are burnt up.? P/n?701959263D.? If one is burnt up, the other is not long for proper operation either.? Replace both at the same time.? ?Looks like these are available in a lot of places.? If you know how to test a resistor you can confirm that the resistors are good (or bad).? Resistors are located at front of engine.? Have to remove engine lower cowling cover to access directly under the fans.? There are other things that can fail- fan relays, for example, but go for low hanging fruit first.? Be sure that the compressor is turning-? you can tell when you turn the engine on by the additional load.? ??
