There is a tiny screw that secures the plastic ignition switch in place, although mine is a Phillips head. If it were that, the switch would come off when you pulled it toward the firewall.
?
If you can't see an obvious spot and nothing seems loose I would just hold onto and think of it as one less rattle?
?
Opened up the plastic shroud around my ignition switch and steering column (97 EVC), and a small screw, about 3/4" long, threaded 1/4" on the end, #9 Torx head, fell out.? Pic just posted as "Unscrewed".? Where does it go?? Any ideas?
