There's no reset.
There's one long circuit loop from the lamp circuit in the dash
through all four brake pads then to ground. If there's a break
anywhere, the lamp illuminates.
So--it could be a bad connection on your new front pads, or worn out
rear pads, or a break at the rear pad connectors, or a broken wire
anywhere in the circuit.
I've had trouble with the connectors breaking on my front pads. Right
now I still have the original front pads (60K miles), but the sensors
are jumpered at the front wheels to keep the light off.
I've made up a test plug from an old rear pad. I can plug it in at any
wheel. Just tie the two wires together and you'll simulate an intact
wear sensor.
Carl
2003 EVWK
toggle quoted message
Show quoted text
--- In ev_update@..., "Dan Pastor" <danielhpastor@...> wrote:
Just replaced the front brake pads. warning lamp still on. Looks like
((0)). How does one reset (turn off) the blasted lamp?
2003 Eurovan GL
Thanks!
