开云体育

You’ll need a special tester that can test capacitors; a simple continuity test does not accurately show you whether the cap is good or bad. Here’s a quick youtube video giving some more info:

Thanks chaps :) I am a little clearer on how to proceed….. the capacitor seems to be ‘open’ according to basic testing with my multimeter set to continuity chime/buzz, I don’t seem to be able

Hi R about torque is possibile somebody take out motor and he dont put back key in to keyway this key has small lock pin ,so take out motor and be sure this key is there ,other issue can be some of

Hi guys i would like to ask any body who own milling machine for 220V EMCOMAT 7 could you send me please picture of capacitor and if you have motor data plate please ,or use this mill similar

Mill (if it's 4 speed model) should only have 4 wires and none should be shorted together. One must be hardwired to the motor body, so should be easy to find. Other 3 are equals in 3ph motors but are

Hi Rick I think Chris has answered you as to the most likely problem being the capacitor if the wiring is correct Make sure you get a “motor run” capacitor i.e continuous duty Inso far as the

You might want to look at the mill capacitor in the back of the headstock. Mine went out a few years ago and that was the issue. I ended up finding a replacement at our local hvac supplier Chris

I’ve added some pics to the group photo gallery :)

Hello gentlemen I’m new here and new to vintage Emco machines too :) my background is marine engineering and I have questions about my new machine that more experienced ppl will likely know ! First

Hi Guys , one very nice lady's? husband passed away and she woould like sale his lathes and some tools because house is toobig for her and she would like buy smaller so most tools? should go , price

Hi Ollya try facebook there is groupe specializate for 6 speed mill for emco FB2? EMCO FB-2 USERS(https://www.facebook.com/groups/538012830275374/)so i belive you can quickly find somebody who will

Hi I'd really like the 6 speed FB2 mill attachment to go on my V10P rather than the 4 speed one. Is anyone selling one please? Aren't there some copies too - anyone know what they're called please? --

Hello. Got this with my metric maximat v10. Don't cut imperial threads, so it's up for grabs. https://www.ebay.de/itm/187167058097 Thank you and best regards

All We are not aware of any problems with the Group Email Just assumed everyone was having a break ? On that note Happy Easter / Easter weekend everyone ? Regards, Carvel Co-moderator Sent:

Hi Andrei, i hope all have holiday and this is only this reason?B-):-D. ---------- P?vodní e-mail ---------- Od: Andrei via groups.io <calciu1@...> Komu: [email protected]

Hi Dan i soo it too there ,but normaly during weekend is here very bussy here?:-DB-)?and i hope is like you suggest . regards Roman ---------- P?vodní e-mail ---------- Od: Dan B via groups.io

I went to the group home and it looks like there were very few messages in April (only about 20). Best Regards, Andrei mailto:calciu1@... ________________________________ Sent: Sunday, April

I too have not received many emails lately, and I just assume that it is because there has been a lack of activity. Looking at the "Messages" section for this group, there has been what appears to be

Hi Karl thank you very much for confirm you had similar problem like me ,i hope is only some problem in software from provider of this pages and he try fix it , regards Roman ---------- P?vodní

I was wondering the same thing, this is the first group email that I’ve received in a number of days, especially since this group is usually so active. karl