开云体育

Hello John, Yes, that's right! Not only has WB2OSZ added both CONNECTED mode AX.25 sessions but they also support the AX.25 v2.2 specification for selective ACKs, etc. This is a significant

The latest direwolf 1.4 development version, on the "dev" branch, has support for AX.25 v2.2 "connected" mode. The application interface is available only thru the AGW network protocol, usually active

I've used the connected-mode support with a few local PBBSes; admittedly not extensive but it worked well. It implements support for AX.25 V2.2 and initial connections to some types of stations may

Hi David, Thanks for the info. It's been a long day for my learning curve on digital packet. I need to break off for today, and hit it again tomorrow. It is starting to sound like what I am looking

Allegedly there is now a "connected mode" for DireWolf in development snapshot d... https://github.com/wb2osz/direwolf/releases John [direwolf_packet] <direwolf_packet@...> wrote:

Hello Stan, With Direwolf alone, no, this isn't possible. Now, if you install LinBPQ and the TNC2 emulator package, yes, it's possible.

With physical TNC's there is a serial connection from the computer to the TNC, whereby an operator can go into a "command" mode interaction between the computer and the TNC. Is this possible with

Hello Keith, 1.4 is a development release and is expected to have bugs. If you're willing to try it out, report bugs to the Github page, and wait for fixes, it would be great to get your help. If you

I recently downloaded and installed v1.4 on my Raspberry Pi. It was a new Pi so I chose to use 1.4 instead of the 1.3 that I had always used before. My question is are they the same for interpreting

Thanks David; that did it; sorry to waste your time with my oversight. 73's Stan

Hello Stan, Please read section 5.2 of the Direwolf User Guide (it's in the doc/ directory in the tarball as well) to understand what other packages (dependencies) need to be installed before

I am running Kubuntu 16.04. Downloaded the tar ball for version 1.3 Following is copy / paste of terminal cli commands and responses: stan@CoolerMaster-16-04:~/0_DireWolf$ ls -al total 13536

Just had a look at your notes David. I think its going to be more than a quick install. I'll block out a weekend for it!

Hello Koval, This doesn't read correctly. This text above says that UR3PHP-10 heard UR3PHP-10? Self-reporting should be ignored What is IF? You mean the Internet? That's what I'm going to assume for

Hello David, I've calibrated rtl-dongle at the beginning. As you said, rtl after some times working is much more warmer than before. I will try to calibrate it again. I've also checked SSID (aka -0).

Hello Koval, In your original email, your example APRS comment said "RaspberryPi + RTL-SDR". If you're indeed using an RTL dongle for this setup, are you also using that with your MixW setup? I'm

Dear all I following the manual setting for the Morse Beacon: CBEACON dest=MORSE-6 info="de VR2XKP/R." However, I found the transmition will be end up on the "K" letter. I try the info message change

Let's take other case. UR8US-8 station also use DireWolf. According to http://aprs.fi/info/UR8US-8 http://aprs.fi/info/UR8US-8 Stations heard directly by UR8US-8 UT3XA-9 1 2016-12-07 09:45:19 But

Hello David, Thank you for your explanation. Are you sure it's an RF transmitter and not just an RX-only Igate? Yes, I am sure that UR5KSH not only Igate, but also transmitting station. Why? 1. I can

Updated Error Message ... So I removed the Ardurino from the mix to better attempt to isolate the problem. Now I am getting a different error message: Diirewolf will send 100 packets and then: Audio