Direwolf Command Line Options
|
Hello...
Since updating to the newest version (1.4d), ?i have been getting telemetry error messages on decodes. ?Starting it like this: ?[steve@localhost ~]$ direwolf -p -qd
Here is an example...
Digipeater VE1JOT-5 audio level = 33(14/13) ? [NONE] ? _||||__ [0.2] EI2GYB-3>MBX,VE1JOT-5*:Mail for: W6OAV VA3HRA KO4OP UZ7HO [0L] KB9PVH-7>LINBPQ,VE1JOT-5,EI2GYB-7:Temp:10.4F<0x0d>Wind:SSE @ 4 mph ?<0x0d>UV: ? N/A W/m2 - Rain:0.00 in<0x0d><0x0a>
Digipeater VE1JOT-5 audio level = 31(15/14) ? [NONE] ? _||||__ [0.2] KB9PVH-7>LINBPQ,VE1JOT-5*,EI2GYB-7:Temp:10.4F<0x0d>Wind:SSE @ 4 mph ?<0x0d>UV: ? N/A W/m2 - Rain:0.00 in<0x0d><0x0a> Error: Information part of telemetry packet must begin with "#"
VE1JOT-7 audio level = 32(14/13) ? [NONE] ? _|||||_ [0.3] VE1JOT-7>ID:NS105:VE1JOT-7 FN74pb
I am using this with LinBPQ and the data is a simple text weather beacon from generated from my weather station here. ?It does not seem to be creating any problems, but i did not have the issue with the earlier version of 1.3...
73, ? --steve,kb9pvh--
p.s. ?It seems to be working fine otherwise....
|
