开云体育

Hi Patrick, Thankyou for the fast response, i've attached the conf file it's from my PI setup. As far as i can see the igate is being pointed at my TX Channel 0 and Channel 0 does transmit both my

Hello Paul,The line with [Ig>tx] should be followed by a line beginning with [channel number] in magenta colored text. If you do not see that, your IG to TX is not configured or the data is being

Hi All, I'm hoping that someone could kindly shine a light on a daft problem I have... I'm sure the problem is a config error but I simply can't see it myself at the? present time. I've been running

Hello Hans, First, I assume you're NOT using the built-in AX.25 TNC in your TS2000 and instead, you're only using Direwolf. Correct? You cannot use both at the same time. Next, what are you using as

My setup: 5 element 2m X-pol yagi --> TS-2000 --> Behringer USB audio interface --> Direwolf --> UISS I made some QSOs with this setup through the ISS APRS repeater, so my setup is working - sort of.

Rather than use crontab to try to keep a process running (which it isn't really designed to do, but as proven here can be coerced into it), you may wish to use the systemd service that the

David, Mike I know Gary, PiGate RMS v2 and linbpq well. I also have this working with PiGate and PiGate RMS which uses linbpq rather than Paclink-Unix. I am just working on it for our club. I also

Hello Mike, I spent some time with Gary VE7POP and we were able to successfully get PiGate to work with using Direwolf on a Raspberry Pi. The technical details was passed on to Mark Griffith (creator

The originating stations are from all over the world.? the problem is the tier2 aprsis servers sending me these "message type" bulletin packets to targets outside of my range filter.? The addressee

Have you considered blacklisting the originating station of those bulletins? After all, the APRS-IS servers are not the source of all that spam, so you might see that from all APRS-IS servers. Or is

Yes, "LinuxRMS" combined with direwolf/ax.25 on a Raspberry Pi becomes a Winlink RMS gateway on VHF/UHF. Be advised, LinuxRMS is non-trivial to install, but doable, Winlink demo of DigiPi at 14:00:

Km4ack build a pi is perfect for winlink express station. His is called PAT winlink Mine is running perfect A few hickups with downloading forms at this stage. But you can send and receive It supports

Does it support acting as a RMS Gateway, Craig? (Fair warning, I'm fairly new to Winlink) Mike

Compact?? low power?? Raspberry Pi? ? Winlink? I can shamelessly self promote a */DigiPi/*? that does all this and more, many instances in the field now. ?? http://craiger.org/patreon/ Always

We are redoing our club's Winlink 2m gateway at the tower. Original set up was a Windows PC and a KPC3, but we are wanting to switch to something much more compact. I have come across the PiGate

My HT radio message list fills with BLN* messages from all over the world, it hits the packet limiter on direwolf, suppressing legit traffic. I wrote the owners of DALLAS and T2QUEBEC, no answer.?

T2QUEBEC is a Java version server, and I have had problems with getting excessive stuff from Java APRS servers when I use filters. Maybe your issue is related to what I've seen. Arnold, KQ6DI

Hello Craig, Do you have any examples of one of these APRS-IS flooding events? Are you sure they are all bulletin type messages? To me, the better solution would be to work with the APRS-IS folks to

i think i answered my own question with the new "group" filter.? Is this the right way to implement the local filter? FILTER IG 0 ( t/m & ! *g/BLN** ) | ( t/w & b/KM6LYW-3 ) "only message-type

Every now and then an APRSIS server sends thousands of bulletins to my igate, jamming the channel until I reconnect (observed on DALLAS and T2QUEBEC) Is there a proper way to locally filter messages