开云体育

David, Understood... my equipment will be in a upstairs room and I operate out of my downstairs office so I don't have any requirement to physically see the iGate equipment. -- Mike - K5MAP

Hello, I have a DINAH in use with Direwolf, and DW shows received audio levels in the 9-12 range with a target of 50 per the manual. When I adjust the mic gain for the DINAH using alsamixer, the

Technically, no. Direwolf have all the required functionality to support all aspects of APRS, APRS-Igating, beacons, telemery, etc. To be clear though, Direwolf doesn't support APRS messaging or

Is there any other software other than Direwolf (installed on my RPi) needed to setup a xmit/receive APRS-IS/iGate gateway? -- Mike - K5MAP

Thanks, I saw your thread. I’m checking those out now

have the same problem with my Baofeng/Direwold/soundcard setup. I fixed it by using a SignaLink. I am also looking at the Easy Digi. It's sold on EBay in several versions, or you can build the kit

Thanks. I found that thread about 5 minutes after hitting send. I appreciate the reply

I suggest that you move this discussion to a new topic since it has nothing to do with the IC-7100 not keying. Given what you appear to be doing, there is really no need for the old TNC's. You can run

here are PLENTY of comments about the Baofeng HT and DIrewolf (or any other packet related applications).?ry a search on Baofeng or the model radio you are trying to use.?? Most express extreme

I know this is not the optimal configuration but it’s an experiment and it fits my budget. I’ve searched high and low but have not seen anything related to this issue. I will try to describe it

Thanks David.? We'll do. I think this topic can now be closed. Thanks to all who replied. 73, Max DU2UXH

To follow up this discussion about using inexpensive Chinese radios for packet is *bad*, another user sent me these two excellent articles giving empirical details of why using radios using the

Hello Max, I would agree that moving this discussion to the /g/RaspberryPi-4-HamRadio list would be best. Once you post your email there (I'm also on that list), I can chime in on

Max: ?This was 17 months ago and I am not sure that direwolf worked well enough. I recall getting ARDOP working. I don't have a working TNC, so all successes were with 'soft' modems. Attachment.

Hi Chuck. I totally agree, but not on this group IMHO. Would you mind sharing your configuration file?? I have no success with it. email: (callsign)atgmaildotcom 73, Max DU2UXH

1. If you are talking Raspberry Pi and a BBS, consider G8BPQ's pilinbpq. I have used my IC-7100 and Raspberry Pi with G8BPQ's pilinbpq. 2. IMHO and for future reference, ?'*Raspberry Pi*' and '*BBS*'

Hello Corky, I have Kam v8.0e, Kam+ v8.0, 2x KWM9612+ v3.0, AEA PK232 MBX and a PK-88. Yes. Is there a better way to use these old TNC's? Our club BBS is right now on a KAM+ via a Win8.1 computer that

I'll be honest, I think you are much better off with a USB-to-RS232 device than a level shifter and going to the Pi3's internal UART.The USB device is probably cheaper than the level shifter.? It is

A few questions to help starting in the right direction: 1. Which Kantronics TNC's are you using (KPC3, 9612+, ???)? 2. Are you trying to use the BBS built into the TNC or setting one up external to

Hi Max This group might be able to offer more general advice for your project .... [email protected] Ray vk2tv