开云体育

I know this is a busy group so thank you for reading this. It's been quite some time since I've played with packet radio so I've probably overlooked something obvious. When I last used my Yaesu radio

A little bit off topic. I have been chasing down an audio buffer underrun problem that only happens with direwolf. I am also running pulseaudio despite not being a good idea for direwolf! I am making

Hi, The Icom 9700 stops transmitting as soon as the PTT signal is dropped, but it does have some delay in its audio processing. This means that you need to increase TXTAIL in direwolf.conf in order to

I am on the right station - checked and double checked, even tried other stations with different frequencies. It is always the same. ?I do see APRS data but no AX.25 connect.

Those are connection attempts transmitted.?? There is no reply. Can you hear anyone else talking to VA7QBE-10 ? Are you on the right frequency?? Are the winlink stations using 1200 bps AFSK or

I have spent quite a while trying to figure out why I cant get direwolf to connect to any AX.25 nodes. It starts up fine and sees APRS traffic but if I try to send by packet in Winlink or connect to a

That is what I was suspecting. This evening I had a few mins to make some changes and send the third party packet in its string representation. Yet there is still something a little off. [15.is

This part needs to be in plain text, not the AX.25 header format with the characters shifted left.

I have been doing some reading and experimentation this morning and have a theory. Hopefully you can confirm my theory. I am using a forked copy of the ioreth script (actually forked copy running

It has helped a little bit, but I tried to send a third party packet back over the KISS connection and I am getting DireWolf telling me that the packet is not AX.25. I have had? very little

user@host:~ $ cd direwolf/ user@host:~/direwolf $ git checkout dev branch 'dev' set up to track 'origin/dev'. Switched to a new branch 'dev' user@host:~ mkdir build && cd build (No std out)

Oh ....? and the source code, I followed the doc section 2.3 ~ cd ~ git clone https://www.github.com/wb2osz/direwolf cd direwolf

Thanks for the quick replay John. As requested:? ? l s -l /home/#######/direwolf/test/scripts/? yields: ls: cannot access '/home/#######/direwolf/test/scripts/': No such file or directory From the

Interesting. I just tried it on bookworm and the dev branch was fine. Lines, similar to this, containing "warning" are not a problem. CMake *Warning* at CMakeLists.txt:307 (find_package): Lines,

The KISS frame uses AX.25 formatting for addresses. This means the addresses are constrained to maximum 6 upper case letters or digits then an SSID in the range of 0 to 15. APRS-IS has looser

I installed gpsd with apt, after reading some of the output previously posted. Attempted the [ cmake -DUNITTEST=1 .. ] command again, still fails. Additional data if it helps: /path/direwolf/build#

I have followed the instructions as given, and get these errors upon attempting the dev (git checkout dev) [page 10, RPI-APRS.pdf]. {My first post, and I hope I provide what is needed to ask for help.

I am working on bringing up an APRS bot and I am having some troubles. Originally I was running Direwolf 1.6 and was having problems getting packets from the APRS-IS connection to be seen by the KISS

Thanks John. The user guide is where I ended up finding my answer.... Not sure why I didn't see it earlier before asking. Lots of sources online simply say dB as you pointed out. You are correct that

The direwolf User Guide, found here https://github.com/wb2osz/direwolf/tree/master/doc ( https://github.com/wb2osz/direwolf/tree/master/doc ) , specifies "dBi" for PHG antenna gain. The confusion