开云体育

I have seem some TNCs that have a larger packet window configured, they sometimes will both accept the initial connection AND send subsequent payload packets before the connection is confirmed up. I

RR is not expected at this point. The station requesting a connection sends SABM until one of the following happens: - Receive UA frame which means the connection has been accepted. - Receive DM frame

I have made some progress and now have good audio levels and am getting stable call/response between my home radio setup and the RMS. However, it seems like my station calls for SAMB, then the RMS

All, I have a image for our club that runs direwolf, PAT and QtTerm. What works and what does not: works If I compose a message and send to a BPQ / CMS server it works If I send a message to someone

I agree about the audio levels - I have figured out how to stabilize the audio level response from the Remote Message Server, but I am still unable to connect.? The RMS seems to be immediately

I followed the directions and loaded the card. After fiddling a bit with the .conf file and the audio settings, it's all up and running nicely. Thanks.

You can build an Alpha test version ( /g/direwolf/message/5021 ) of Direwolf that supports CM108 on Windows.

Hello Michael, Ok. This is your KC2EHR system making an outgoing connection request to K2DLL-10. That's good. This is K2DLL-10 responding to your connection request to data but you're missing some

It's hard to tell exactly what is going on without understanding the larger context. However, I can provide a few clues for troubleshooting. "SABM" is a connect request.? Your station would send this

Thanks for clearing this up. I started a fresh install last night, with just the operating system. I'll do the just the direwolf and what I need install on this one. Should fix things. thank you.

I have been trying to duplicate the results in the excellent youtube video "Pat Winlink 2M Packet 1200 baud Setup" Everything seems to be working, however, I am unable to establish a connection with

Hi, I'm trying to setup dinah with direwolf on windows. On linux for PTT I need to specify cm108. However this option doesn't work on windows. What should I do about it? Thanks, Victor.

Just while posting it in this group I replaced the callsign with NOCALL as it was not mine. Building it for a friend. John

An issue has been created here: https://github.com/km4ack/pi-build/issues/243

You will need to rebuild it from source, just like the message says:?? "You must rebuild direwolf with CM108 Audio Adapter GPIO PTT support" Don't worry.? It is easy.? Follow the instructions in

I'm running direwolf version 1.6 on a Raspberry Pi via the KM4ACK Build a Pi app. The soundcard is now a DRA-30. I had been running a generic cm108 soundcard for a receive only gateway. I am trying to

Hello John, GPSD taking over other serial ports has nothing to do with Direwolf at all. Once a vanialla gpsd is running, it can attempt to take over and BLOCK the use of serial ports. Now what's more

For my Odroid XU4 I landed on this by googling and finding a fairly old article. PTT /dev/ttyUSB0 RTS DTR Also I seem to recall it working with the DTR and RTS reversed on a different platform. In

Guess found the solution PTT /dev/ttyUSB0 RTS DTR seems to work John

I just tried all options PTT /dev/ttyUSB0 -RTS/RTS/DTR/-DTR they all resulted in that the transceiver went into transmit as soon as I start up direwolf John