开云体育

I really didn't want to write up all the things I have tried in the last two weeks. Nor did I want to force you to read all of it. I've been trying to follow what was done in the document at the link

My first attempt with telemetry. This large Direwolf project got me to this point in one day. Thanks. Running on a Raspberry Pi 3, Raspbian Jessie. Using SENDTO=RO to troubleshoot. Getting "Found

A good step #1 would be to try to record the audio from your Rpi and see if you can play the audio back though a connected pair of headphones, etc. Though more command line centric, you can follow

Are you trying to use pulseaudio or? What is the soundcard ## ... hint alsamixer in terminal you dont need to be an expert .... your not running 300mph on a track .... but you do need to learn how to

I am attempting to set up a Raspberry Pi 3 as a receive only igate. I am using a Syba USB sound card. It indicates CMedia CM119 on the package. Direwolf will not decode packets. I have tried putting

I want direwolf to hand it off to the APRS-IS network, which is what I'm struggling with as it keeps trying to send it over RF which does not exist. APRSIS-32 works fine using APRS-IS, but I don't

You need to make a decision -- do you want direwolf to communicate with the APRS-IS network, or do you want it to hand off to APRSIS-32 and let APRSIS-32 handle the connections to the APRS-IS network?

Hi Matt, AGW/KISS is set up correctly in APRSIS-32 I am actually receiving messages, if I disable Tx then it won't try and tell direwolf to send the message or ack, how do I get direwolf to treat

Configuration will be in APRSIS-32 -- you need to set up the AGW port that faces your direwolf modem to handle messages and to enable TX (although if you don't have a transmitter connected, better to

Sorry I am actually receiving messages, However direwolf is trying to send messages and ack as over Rf not the igate.

Hello Dale, Which version of Direwolf are you using and what OS are you running it on? Are you using PTY-KISS, TCP-KISS, or AGW? In this configuration, are you IGATING from Direwolf or from APRSIS? If

I have direwolf set up as an IGate and using the Pseudo Kiss or AGW setup on my APRSIS-32, Data is being sent to APRSIS-32 and can see all the stations my Rx only IGate is picking up. I have 2 issues:

Hi David, Thanks for the RTLSDR-Airband info. I will play with it. Maybe there is an easy way to interface it with Direwolf. I have play before with other RTL-SDR software like aisdeco to decode ship

The APRS-IS servers remove duplicates. If multiple IGate stations submit the same packet, only the first one is retained. If some other station sent the same information a millisecond sooner, the

Hello Jose, The rtl_fm tool only allows demodulating one frequency at a time but I recently came to learn of https://github.com/szpajder/RTLSDR-Airband . This software can support 8 "slices" per SDR

I installed Direwolf on a Raspberry Pi with RTL-SDR and can decode APRS packets OK with the command: rtl_fm -f 144.39M - | direwolf -c sdr.conf -t 0 -r 24000 -D 1 - Is it possible to have a dual

Keith, I put it on another device earlier (o2 Joggler) not sure if anyone has used one of these but thought it would be useful as I can put a map on the screen. I feel a bit of an idiot here as a

Hi Dale, It says 1.3 when it loads, no mention of beta. 73 Keith G6NHU.

Not sure which ‘Keith’ your asking. But I am currently running 1.4 but have not spent enough time with it for a full evaluation. —Keith, WA0TJT

Keith, What version of Direwolf are you using, is it 1.3 or 1.3 Beta? My friend has just set a Pi up and his is working correctly, however he used plain 1.3 So not sure if something is broken in the