Hey Joe,
All my sliders are at max which is why I was a bit
worried about this.? My radio is a Kenwood TMD710G.? I forgot to
mention that. I have not checked whether it has gain controls that
could be changed.
Yes.. I have a D710 and this is possible but I think the issue is
more on the sound device side.? In addition to AGC, your sound
device might also have a preamp that might need to be disabled.?
Btw, on the D710, are you using the TNC on one VFO and running
Direwolf on the other VFO?? The D710's built-in TASCO TNC is ok but
Direwolf will definitely out perform it.? How are you connecting
your sound device to your D710?? You should use the 6pin "DATA"?
connector on the back of the main D710 body.
Btw.. if you're curious on the D710 level controls, I cover a bit of
it here:
??
? I also would prefer not to use Auto Gain Control.?
So now I have muted the AGC and the audio levels are back down to
single digits.? I hope I can continue to use this radio but I can
change if necessary.
When you say "single digits", according to what.. Direwolf's
standard out text?
--David
KI6ZHD
