开云体育

Hi Charles, it's been a while. You might add the .h file has to be in the same folder as the .ino file. Ralph wrote:

Hi Charlie done that where do I place the competed file "TablesV5.h "if you pardon the expression

Hi thank you very helpful much obliged

Hi, Leslie, The first tab on the Excel file "RELS_data_V5.00.xls", labeled "Instructions", gives detailed instructions on creating the "TablesV5.h" file starting on row 17. Basically, you open a

Hi John I am trying to install your latest version RELS_V5.0n which I may add is really helpful? especially the? include "Tables V5h "if I can get it working ? . I completed RELS data for my lathe

Good morning members. Please see link below, hope of interest. My good friend Dave Abbot (Myford Boy) put me onto this. Naturally before the digital age this type of oiling was fitted on most machine

Hi Julian Many thanks for your rapid response and I appreciate the full post. It seems to me, and I am not an expert that there are at least 2 types of oiler systems 1) gravity "drip" for spindles etc

John, Without seeing the install it's difficult to recommend how many pumps.? I guess one for each of the current oiling points, but remember you'll only get X number of drips depending on how you

Attached a couple of photos, like the lyrics of a great Beetles song. "She came in from the bedroom window" LOL -- John

Hi Mark y Julian, Your oiler is definitely the way forward for me. Because of limited space in my workshop, the only way I could my existing hand pump system was to install the unit onto the back of

Amazing work, Thanks for posting into digitalhobbyist. I am sure you will get more downloads. Please keep us informed on any other Arduino projects related to hobbyists. John

Much quieter. Also I increased the PCD on all gears by 1.5 mm, Cheers John

Are the new gears quieter? Ralph

GitHub only shows me the last weeks traffic and currently it shows the code was cloned 4 times. Mark Sent: Tuesday, June 6, 2023 7:00 PM To: [email protected] Subject: Re: [digitalhobbyist]

Mark and I are slowly coming to terms with the kudos of being internationally published authors, but we must insist that now we're famous we don't want any special treatment on here! John, gear

From: John Lindo Good morning members. This month's cover photo shows a box that I 3D printed to hold my rotary table. As the box was too large for my printer bed, I printed it in separate parts

Well done guys. Any chance of posting the article, as I am not a subscriber to this particular hobby magazine, 2 is enough. By coincidence I was about to post my method of attaching oiling systems

Thanks animal, Julian did all the work to get it published. Kind Regards Mark ________________________________ Sent: Tuesday, June 6, 2023 4:34:14 AM To: [email protected]

Who LOL -- John

Please see the attached video of cutting the keyways using a sub routine g code and DDCS controller. Basically the X axis is central with the bore, the Y axis is set to a finished depth. Z axis moves