开云体育

Pdf V5 RELS schematic file added . Cheers -- John

Hi, Leslie, The schematic I sent you, dated? 26-July-2020 in the file name, definitely corresponds to Version 5. I know you have probably done this, but as I mentioned, the original keypad was

Any reason why these and other schematics aren’t posted in the files section of the groups.io site? Sent: October 5, 2023 8:59 AM To: [email protected] Subject: Re: [digitalhobbyist]

Hi Charlie thanks you so much for your help. Got the schematic and wired the keypad accordingly with pins 22? to 27. Still no joy, the LCD? shows the splash screen and then to feed but the keypad

Hi thank you very much On Wed, 4 Oct 2023 at 16:50, CLevinski<clevinski@...> wrote: Leslie, Schematic sent. -- Regards, Charlie New Jersey, USA JENNING’S COROLLARY TO THE LAW OF

Leslie, Schematic sent. -- Regards, Charlie New Jersey, USA *JENNING’S COROLLARY TO THE LAW OF SELECTIVE GRAVITY:* *The chance of the bread falling with the buttered side down* *Is directly

Hi, Leslie, I will email you the latest schematic. Originally, I believe we used an analog input on the Mega 2560 and a keypad that, through a resistor network, would provide different voltages

Hi all, sorted the reason having issues with sketch and TablesV5.h because I copied the imperial feed as well from xls into Table 5.01. Now the Keypad buttons will not work so reverted back to RELS

My main question is does the lathe work? Does the CNC work?

Excellent, anymore info would be very interesting -- John

Hey all, picked this little guy up yesterday. Has anyone had any experience with factory made cnc mini-lathes? I can find the model number still made but it is a more modern full enclosed touch screen

Thank you both for the kind words, but I am just trying to help out a fellow member and machinist. -- Regards, Charlie New Jersey, USA *JENNING’S COROLLARY TO THE LAW OF SELECTIVE GRAVITY:* *The

? [email protected]> wrote:

This is not something I've needed here, but I'm thinking "Most Valuable Member" in his case. ;) Bill in OKC William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by:Good judgement comes from

Many thanks to Charlie for taking the time out clarifying and answering questions recently posted referencing the RELS? contained in the Files section. He is a valuable group member, Well

Hi Charlie thanks so much will have a another go tomorrow Regards Les

Leslie, I can't tell from what you've posted exactly where the problem is. The first thing that I would check is the file name for the table. It should be "TablesV5.h" with no spaces. Make sure that

Hi thanks for your help I have this error In the? ino file # included \RELS\RELS_V5.00n\TablesV5.h:113:1: error: expected declaration before '}' token Also in the notes it is stated "that the

Hi, Ralph, As you mentioned, the .h file must be in the same folder as the .ino sketch, as specified in row 32 of the "Instructions" tab of the spreadsheet. I hope all is well with

Hi, Leslie, As Ralph has pointed out, the "TablesV5.h" file must be in the same folder as the .ino file. If it is, opening the .ino file will pull the .h file in with it automatically, as long as the