You have it Ralph!
To help maybe see the pics of my control unit and Joystick box.
The main control unit shows the four Left, Right, Front, Rear
buttons with the Select button to the left and a reset button top
right. The two 25 way D connectors connect to the Joystick box and
the main Power and dries box.
On the Joystick box you can see the four "Limit" buttons. The "Ring"
around the centre of the button illuminates. The Red button enables
Rapid travel. These boxes have been around for a while that is why
they are a little roughed up!
Richard
On 28/07/2020 18:46, Ralph Hulslander
wrote:
toggle quoted message
Show quoted text
Just read the whole thing again probable the 4 or 5th time and it
"might" be sinking in.
The "limit" switches are virtual not actual limit switches.
It actually makes sense. They are set for distance travel limits
not to prevent overtravel of the leadscrew.
Ok moving on!
Ralph
--
Clausing 8520, Craftsman 12x36 Lathe, 4x12 mini lathe, 14" Delta
drill press, 40 watt laser, Consew brushless DC motors and a non
working 3D printer