开云体育

For under $45 you can have the whole deal. I run this setup with a laptop. It actually works quite well. Baofeng Radio TNC Packet Radio cable https://www.youtube.com/watch?v=GjYLhDKrNeE

Hi Keith, I am thinking about APRSdroid and baofeng radio. I have seen people on Youtube using it with great success. This setup should not be crazy expensive and very mobile.? In the meantime I will

Hi John, I live in Mississauga and I work in TO. There are at least 3 repeaters in the area that I know about and I do not hear anybody on them. Except for the Tuesday Net at 8PM on YZZ,? I could not

I am still learning this stuff, but as I understand it, you can QSO with a ham on a different D-Star repeater with out linking the repeaters. It is a matter of setting a route in your and possibly in

Tom: Where do you live? In my home area and just about every place I travel, people don’t mind unlinking a repeater and relinking it somewhere else for a QSO. As a courtesy, it’s always good to

Well lets go through that. Nobody is stopping you from using your local DSTAR repeater as long as you are using digital voice. As far as linking, some people get upset, some don't. If there isn't

We have a Georgia Ratflector, gaares.ratflector.com, that can be accessed via Internet. We also dedicated REF030D for data (D-RATS) traffic. We normally have the WD4STR C repeater in Lawrenceville

Hi Keith, I would like to add my two cents since I am new to this ham radio as hobby and to D-Star. I own my radio for about 3 weeks and the problem with D-Star is that you can not really use it.?You

You could set up your own Ratflector. After that you connect your DTAR radio to your ratflector via USB/Serial cable. That is what I do for our local ARES. BUT I only connect the RF link to our DSTAR

Dear Drats list friends, I am curious about how to practice Drats over an RF link, I live in Atlanta and we have two very active DStar repeaters, W4DOC and WX4GPB.? Is there a specific reflector or

It was found : http://www.d-rats.com/releases/31-d-rats-apt-repository/ Problem was solved by installing the latest "daily" 0.3.3 via "python setup.py install" There was some issue building debs and

Hey Mitch, Where did you get this copy of D-Rats? I didn't find ANY hits on Google and this smacks of someone in the Debian world disabling it as it's not clear if this ancient compression is

A fresh install of the latest code instead of the Debian package fixed the issue I had. I don't do Windows, so can't speculate on how or if it might work there. -- Mitch

Mitch I'm not a linux guru but would the guys from Linux_Rms have an answer. I wonder how this would work as I run a winlink gateway using BPQ32. and D rats thrown in the mix. I can use AWG and UZ7HO

Installation of latest daily fixed the issue. THANKS K3TSZ!

Did you ever find a solution? I can see that lzhuf is missing from the installation, but I cannot follow the wl2k.py code well enough to find where to copy it TO. wl2k.py calls p.source_dir() when

Apparently, this is a long-standing issue. I have a copy of lzhuf on my Linux machine, the only question is where to put it for D-RATS to find it. Anyone have a clue?? Otherwise, I will go and put

root@sova1:~# uroWL2K Mode is: Network <- \r <- Callsign :\r -> AB4MW <- Password :\r -> **** <- [WL2K-3.0-B2FWIHJM$]\r -> [DRATS-0.3.3-B2FHIM$] <- Wien CMS >\r -> FF <- FC EM

Patrick, ? ?Thanks for all the info that you send out and all in your files section. I will say that I have been involved with HF Packet since the 1980's on Network 105 ..14.105 lsb 300 baud and it

Well, that was easy. I am online with D-RATS HF AFSK 300 baud. I used the KISS TNC option in the D-RATS setup, and linked Direwolf via it's KISS TCP4 linkage using socat. Obviously, this is run as