开云体育

Turn off the power save feature in both of the radios. Go to D-RATS preferences and make these changes: Under Transfers, enable "Remote File Transfers". Set Warmup Length to 16. Set Warmup Timeout

Hello All: Thanks to the helpful responses, I now have the 91AD and 92AD working as the radio part of a Drats node. As some folks had noted, baud rate was the issue and at 38K baud both HT Dstar

I have been trying to get a QST message using the CAP feed working with no luck so far. Has anyone got a CAP feed message working they would share as an example? An RSS example too? I have been

Jeff,It sounds to me as if you are running two computers each with their own radio in the same room. Here are a few suggestions: Uncheck the raw text box as it is not needed with D-RATS to D-RATS

try and uncheck the raw and sniffer and check mark in the connect to internet under the file pull down menu. 73

Which radios? And do you have the radios listed in Email Access? -- 73 de N4VIP (SFARES EC, Santa Fe and San Miguel Counties DEC), Don

Hello Mike and Group: Thanks for the follow-up: 1. Do the radios transmit when D-RATS sends data? *** Yes - tx and observed reception by the target radio. 2. Does the receiving radio

Hi Jeff, Some questions that may help us understand what is happening: 1. Do the radios transmit when D-RATS sends data? 2. Does the receiving radio display the call sign and message from the

The one question I have is, is it set for serial and not network? AL KF5SMH

Hello All: I am trying to run DRATS radio -to- radio, with Internet and Ratflectord disabled. Radio setup for com port and baud, and port <=> radio tested via programming as OK. Raw and

Patrick (N3TSZ) Get 100% soon Buddy! + agree on the Packet, DRats DStar bridge, es Ecomm. de Hurb W1DOG Sent: Saturday, February 01, 2014 1:41 PM To: d-rats_group@... Subject: Re:

Glad to hear you are doing better Pat.

Hope you get totally over this soon. I have downloaded files from you in the past, but haven't played with DRATS in a long time. Your files are helpful. 73, Tom KC9ONY

Hello, I just took a look on my pi my ratflector is installed as root user. The file is located /root/.d-rats/repeater.config on another pi ratflector installed as user pi

fantastic...

Has anyone tried to report telemetry from say, an interesting Arduino project of theirs, to d-rats ? I see a guy reporting solar flux and and another Ham reporting WX conditions frequently on the

Glad to have you back! Mike, N0SO

I've had a serious viral infection for the past three weeks, and have been in the hospital for the past eight days. I'm still not over it yet, but at least I'm back home. This is the first chance I've

I could not get the ICS-214 form to work in Linix. Is the file Windows only? Spike, N4EBF

Dave, Many thanks for making the 214 available. 73 de N4VIP, Don Hinsman, SFARES EC