Hi Jeff,?
Some questions that may help us understand what is happening:
1. Do the radios transmit when D-RATS sends data?
2. Does the receiving radio display the call sign and message from the transmitting radio?
3. Is either radio in "power saver" mode? Power saver mode sometimes causes the radio to miss parts of the D-STAR header message as it "wakes up".
4. Is the rf path between the radios good? D-STAR does not provide error correction for the low speed data channel, so if the path is bad you will not get data transfer.
You might consider posting your debug.log file so we can see any messages.?
Mike, N0SO
toggle quoted message
Show quoted text
On Feb 1, 2014, at 6:59 PM, <
jmardensdl@...> wrote:
?
Hello All:
I am trying to run DRATS radio -to- radio, with Internet and Ratflectord disabled. Radio setup for com port and baud, and port <=> radio tested via programming as OK.
Raw and Sniffer says transmission is received, but no text in Chat or seen in log.
TX Message off, no GPS TX on both radios.
Any thoughts from the group?
Thanks,
--
Jeff Marden
KB1TJI
