开云体育

Jeff, I'm struggling to understand this. Wondered if you could help me a little more. I currently have UZ7HO running on the remote PC (with the DRATS client and let's say callsign W4DTO) and the

James, Sounds like you and I have had very similar experiences. Have you tried MULTIPLE packet clients with all pointed to port 9000? Just wanted to confirm that the proxy software is robust

Hello, I have had no success using tnc / packet direct with ratfelctor. However if you set up your PC and TNC with IP over ax25, you can run d-rats on top. I have a raspberry pi set up with a

Exactly. Do step one on the client machine and step two on the "server/ratflector". The key is you will be running both the client and the ratflector software on the "server/ratflector", as the

Will be a while before I can test this, but it sounds like excellent news! So, step one is for the remote D-RATS client that will be connecting via packet, and step two is for the ratflector side,

I think you have to start the email with: WL2K: Example: WL2K:me@... Good luck --73 de Doug (N1OBU)

Dan, Congrats on your test bed setup. I too have been playing with AGWPE and D-RATS. I am using AGWPE with a TinyTracker 4 TNC in KISS. Works great!! I have D-RATS, AGWTracker and RMS

Noticed that you cannot set a DIGI PATH on a sound card modem in the D-RATS software. I assume the function works for a TNC port? Just found it odd that it was available on the TNC port, but not the

I think I finally came up with a work-around for the bug in ratflector that keeps TNC and soundcard modems from working with it: 1) For the TNC and soundcard modem clients, set them up in D-RATS

If you watch the logs for the repeater app you will see it throw errors when it starts up if there is a TNC or AGWPE modem defined. Sent from my Samsung Captivate Glide on AT&TDan Ozment

That's correct, Jeff. I believe there is a bug in the repeater app that causes it to not work at all if you set up a TNC or AGWPE connection in it. I have only made packet work to the D-RATS app.

Dan, Have been trying to connect either a COM port TNC or a sound card modem to the ratflector and had no success with either. From what I'm gathering in your message, you've only got a D-Star

Thanks... once I go things running, it does really cool stuff. Adding my dvap, id91 was easy. working on ax25. Has anyone hooked a HF radio to d-rats? I was kicking around looking at putting my

You can address it to another D-RATS station and it will use the path (RF or network) where D-RATS finds the target callsign. You can also send it via Winlink. the email working, but was wondering

Yes, click New and you will see the ICS213. You fille in the form and only the data is sent. It populates the form on the other end for display or printing under html as an actual ICS213 form. You

Is it possible to send a message (IC213) without using email? I have the email working, but was wondering about off net work. regards

That's great! Glad you were able to get it going! Mike, N0SO

Try running a d-rats client on another computer on your LAN an try to connect to your ratflector using its local LAN address (the IP address of the PC running d-rats_reflector) and see if that

it actually works on the internet. I just setup the router to pass traffic to the server machine. two other clients connected, no problem. I appreciate the patience and help. regards mike

This worked .. I have no device defined in the repeater and only the localhost defined in the client. So now what can I do to allow connections from the internet? thanks for the help by the way ...