开云体育

Mike, You are right, the voltage level out of the Pi's UART are 0-3.3V and need to be converted to RS232 levels to be useful. . RS232 Level converter kits using the Maxim max3232 chip can be found

Thanks again Ed, I had a MAX3232 chip and an RPi proto board so i wired up a homebrew interface.?I got the proto board so I could experiment a little with an RPi in at some future date. I've also got

Fedora Users, You've probably heard by now, Fedora 18 was released a few days ago. If you're running Fedora 18 and would like to get the latest d-rats_daily for Fedora 18, Fedora Linux RPMs for the

All, There is a function within all Icom D-STAR repeaters that utilizes low-speed data called "D-StarQuery". You can find it as a part of the "D-Star Monitor (DSM)" and its located on /opt/dstarmon

For thos with new ID-51A handhelds, here are the menu settings for D-RATS. I believe they will be the sam for the 31A, but someone please verify as I don't have a 31A. GPS>GPS TX Mode = OFF, GPS>GPS

John, I just checked my ID-31and it has the same menu options. 73 Jerome WD4CWG

Thanks, Jerome. I don't have a 31 so I was guessing , but pretty sure they were the same. John WB4QDX Sent: Friday, January 25, 2013 7:28 AM To: d-rats_group@... Subject: [d-rats_group]

I tried to set up a "Private Chat" with a friend on D-Rats the other night just to see how it works. I never did connect with him so I tried to close the windoe or chat session. There doesn't appear

Hey Bob, After trying it out, I discovered it.... When in the privat chat tab, click on "Remove Filter" Tom

Private Chat and Groups are two types of filters. To remove it, select it, then click on Remove Filter on the toolbar at the top of the chat

Remove the filter. 73 de N4VIP, Don Hinsman -- 73 de N4VIP (SFARES EC, SANTA FE AND SAN MIGUEL COUNTIES DEC), Don

Hit VIEW > DELETE FILTER And the Friends chat tab will disappear. Ron P KB3VEW Sent: Monday, February 04, 2013 9:12 PM To: d-rats_group@... Subject: [d-rats_group] Private Chat Tab or

Excellent. Thanks everyone for the prompt answers. That was exactly it! Problem resolved! Thanks and 73's KK4LAC Bob

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the d-rats_group group. File : /USA Overlay/NM/Santa Fe County/Santa Fe

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the d-rats_group group. File : /USA Overlay/NM/Los Alamos County/DRATS

Occasionally I see someone in the Chat tab say "XYZ Net on REF30C" or "AB1ABC is explaining the meaning of life on REF004C". So how to I get to REF30C or REF004C (which I assume are "reflectors") in

Dear Bob, One way would be to use the low speed data capability on D-Star radios and to use the RF segment capability in D-RATS. If you have a D-Star radio with a cable connected to your PC with

If you are using a radio or Dongle, you need to configure a radio in the Preferences. You can connect a Dongle directly to a Reflector. Using a radio, you will need to link the repeater to that

Thanks John. I think it's as I suspected. I need to get there through RF. d-Rats on a PC through the ratflector by itself won't get to the reflectors. No problem (assuming I can get to DOC, BTI, or

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the d-rats_group group. File : /D-RATS on the MESH - KV4I.doc Uploaded by