开云体育

Guys, Please treat this message as the formal announcement to the worldwide. ADX-S V2 is now ready to take big volume orders. Actually I already shipped a big box to a builders' group in Europe earlier today. I live near a big park in Shanghai and I operate ADX-S a lot in the park. With the popularity of FT8CN and iFTx Apps, I realized that I must design for the mobile devices for field digital modes operation. That's why I have added features like TCXO, Audio Cable Adapter and Bluetooth Module. RX modifications are incorporated in the V2 hardware so you can easily toggle ATT while you are suffering from strong BCI. Band module automatic detection and TCXO addition make the setup and alignment much easier. In most of the occasions, you can save the frequency calibration and band setting. Hate toroids winding like me? Now you just need to wind 11 toroids instead of 21 to support 7 bands. Hate desoldering the Arduino Nano module? Low profile sockets are provided in the kit so you can easily replace if necessary, and meanwhile keep the total height to fit in the original plastic box. Photos? They look the same as the ADX-S. Only difference is the main board. The price is 89 USD including tracked air shipping. Please place order through the web store at: http://crkits.com The assembly manual, schematic, part list, source code, and firmware update tools are now available for download from: /g/crkits/files/ADX-S/V2 You are welcome to spread the word to your local group or club. Third party review videos will be available soon and I will let you know the link. Thanks, Adam

I modified ADX-S for use with "trusdx-audio" which is used for (tr)uSDX digital mode. Both audio and CAT are sent and received via serial communication, so only one USB cable is needed to connect to the PC. The modifications to the motherboard consisted of adding an LM386 audio IC and two capacitors. The firmware needs to be changed, and "trusdx-audio" by threeme3 (PE1NNZ) needs to be installed on the PC. More information can be found at https://github.com/je1rav/ADX-S_trusdx-audio/ I am very sorry, but the document is written in Japanese. Please use a language translator like DeepL. JE1RAV

Guys, Made a simple tester for BS170 as you may find two different pin out in the market. We already know 2N7000 has reversed pin out with BS170. Thanks, Adam

Guys, Why you will need this TCXO Module? No more noticeable drift, even WSPR at full RF output! The TCXO is supplied by KDS of Japan. The spec says 0.5ppm. I am offering two options. Please add 5 USD for shipping each order. PayPal to rongxh@... and leave your ship-to address. I have 30 pcs in stock at this moment. The green daughter board on the left, only available to this group, 4.9 USD each, 5 pcs max each order The reworked module on the right, will be made available to public, 9.9 USD each, 5 pcs max each order Thanks, Adam

HI am I loving my crkits pixie. I did the 40-20 mod and N9EGT reviewed it to make sure all was good. so it works. BUT I am curious if anyone has printed a container /shell for the pixie? tnx Niece

Guys, See this post: https://mp.weixin./s/Ri-qgD1n9gKioqVHDRnf4A For more information, you can check out in Files ADX-S/V2 folder in this group. Thanks, Adam