开云体育

CORRECTION - I would like - 1 reworked 5351 module - 2 daughter boards. What is the total with shipping to New Jersey USA 07737? 73 Mike N2MS

Adam, I would like want one daughter board and one 5351 module. The price is 19.80 USD . How much is shipping to New jersey USA 07737? 73 Mike N2MS

Let’s do some math here by example: One daughter board plus shipping 9.9 USD One reworked 5351 module plus shipping 14.9 USD (you don’t have to pay additional 4.9 USD for daughter board again) One

Correct. If everyone uses this TCXO module, the frequency calibration of ADX-S can be saved. Thanks, Adam

That mod also fixes the problem that a lot of those generic Si5351A modules are substantially off frequency. The branded Adafruit ones they are based on are generally closer. (Not illegal, by the way,

Guys, Why you will need this TCXO Module? No more noticeable drift, even WSPR at full RF output! The TCXO is supplied by KDS of Japan. The spec says 0.5ppm. I am offering two options. Please add 5 USD

Guys, My ADX-S (SN: ADXS0001) just passed test at State Radio Test Center Shanghai Lab. See: https://mp.weixin./s/s7yy4GDdOFB00IUv6I11dQ Thanks, Adam

This kit works with my old iPhone 6S Plus too! I can run iFTx on iPhone. It supports both FT8 and FT4. Search iFTx in App store. Thanks, Adam

Guys, Better looking photo. You can build from a kit. It can be ordered together with the ADX-S 4 band or 7 band kit at 5 USD. It could save a USB sound card. Thanks, Adam

Those videos actually show what I described.? They are very good! Note on the finer pitches he used a liquid flux pen rather than the paste flux in the first video.? I still think for smt work the

Surface Mount: https://www.youtube.com/watch?v=5uiroWBkdFY&ab_channel=JohnGammell https://www.youtube.com/watch?v=6PB0u8irn-4&ab_channel=JohnGammell ?n mie., 21 feb. 2024 la 06:35, Jim Burns

Thanks Fred ! Jim

I am a big fan of Hakkos but they are pretty expensive.? Honestly most of the Chinese ones available now are pretty adequate for the job.? I use one at my second house and as my second iron at my

Guys, If you wish to connect 4-pin connector on your Android devices or laptop computers, you might like this board. See more info: https://mp.weixin./s/TrgR8VCXQ3bizbaG6rraaQ Thanks, Adam

Yes, Good information ! What is your preferred soldering station? Thanks Fred ! Jim

The WTCP was a grounded station and though there are much better out there now, it was one of the first proper temperature controlled stations out there and is still suitable for the task with the

Ooh... That daughterboard is very sexy!? Once you release that I will order multiples.? I have others interested locally, too!? ?This is something needed for all of those Adafruit clone boards!?

Hi Fred, Thanks for the tutorial. I have a question for you and the group. I haven't done as much PCB soldering as many of you but I have built Knightkits and Heathkits many years ago as well as some

Hi Fred, Thanks for your feedback. It seems I should change the stand-off supplier as I have found another defect which is a good catch before it makes trouble on your end. Sorry for that. The

I have the ADX-S almost completed.? The bad: I had a defective stand off with no threads and was missing a gray button cap.? The good:? I am not complaining because I liked what came with the kit