开云体育

Guys, I will not be able to ship anything during this period. The shipping will be resumed on 10.7. Thanks, Adam

Hi Adam, Yes, I noticed how clear the reception was. I have watched videos of other Pixies and broadcast interference was very noticeable. I think a fun project would be to take your Pixie2023 and add

Indeed. Peter is doing a great job building and operating the Pixie2023 kit. I cannot believe 3 QSO's are logged in an evening, and I barely hear any broadcast interference. Thanks, Adam

Great review. I thought the performance was excellent for such a simple transceiver. Looking forward to getting mine. Thanks Adam ! Jim WB4ILP

Neil, It is a good idea to order a pair, so you can test without other transceivers. Thanks, Adam

Guys, Peter Parker, VK3YE just reviewed Pixie2023 and the video will be available in a few hours. https://www.youtube.com/watch?v=LbYU7-mV_eY If you are interested, please place order from web store.

The following files and folders have been uploaded to the Files area of the [email protected] group. * /DC40/CPK-2 DC40 Assembly Manual(draft).pdf (

The following files and folders have been updated in the Files area of the [email protected] group. * /PIXIE2023/CPK-1 Pixie2023 Assembly Manual.pdf (

Thanks Adam.? I just ordered two of them. --Neil

Hi Neil, I still have plenty. I have just put on my web store http://crkits.com, so you can easily place order there. I will post more information later. If you cannot see Pixie2023, refresh your web

Any left Adam? --Neil, W2NDG

Hi Nigel, it?s an old Picture. You are right, I used a middle pin and the outer Pin of the large variable capacitor . At first (Picture) I used the two outer pins, variable capacity in series. Thats

I just need to point out that your connections to the variable capacitor are incorrect. What you have done will not vary anything. You need to use the middle connection and one or both of the outer

Thanks for the photo. It is a good idea.

Hi Adam, ive got some good experiences with the pixie and the 49er. The tuning with the variable resistor is only for the receiving frequency. Adding an Inducticity of 10?H and a variable capacitor

Thank You Adam ! Jim WB4ILP

Guys, Part 1-3 https://youtu.be/hI9oYp8xXMo?si=Kah1dlSE4aoXug73 https://youtu.be/2ZAKglvuMsw?si=rCGg8hGPgIZVpeuH https://youtu.be/xVUT1t_wBsg?si=gY-DT3bjpewwOJuT Thanks, Adam

Good morning, it works !!! Incredible, the BCI will dissapear using the attenuator. looking on the signal in WSJT-X without the attenuator the level is to high (red). Using the attenuator the signal

Hi Matt, Due to the AGC, you can see only 2-3 dB difference on RX signal bar. It impacts BCI significantly, not signal itself. Thanks, Adam

Hi, I made the changes to get an switchable attenuator. Using 2x N4007, substitute the 1k R13 resistor. I installed the new firmware 1.3. Everything works great, many DX QSOs from 40m to10m including