开云体育

Correct. Thanks, Adam

Adam, I’ll look tomorrow. So the schematic for the m-derived pi network filter shows the correct values, (2)471 & (1)121 correct?

Excellent. In the 1st lot, please note the 101 in between 2 pcs 471. It should be 121 to have better spurious suppression. The xMONO jumper can be an extra lead. For the documents, please check out

Adam, Received my Pixie yesterday from first lot. now to make time and melt solder. JP KA3BWP

Hi Adam, I made payment and sent a couple $$ extra to help with postage. No hurry so please ship at your convenience. Thank You ! Jim WB4ILP

OK, if you have plenty I'll take 3 DC40. 7.030 is perfect. Also, please add 3 pieces of 10.106 crystals. I think the DC40 are $12.50 and 3 crystals are $5.00. So total would be $42.50. I'll PayPal

Thanks Jim. I have plenty. Please note, the crystal in the kit is 7030kHz. Thanks, Adam

Hi Adam, If available I'll take 2 more DC40 for my friends but if others are waiting I'll order from next batch. Let me know and I'll pay immediately. Thanks ! Jim WB4ILP

Thanks Adam for the video. It is short but a good demo of the RX. I am impressed with the sound clarity from such a simple circuit. I'm looking forward to the build. Thanks for your support of our

This video by JL1KRA might give you some idea of the DC40 direct conversion receiver, very similar to MRX-40. https://youtu.be/11be5L32fBE?si=Dn3uEhTtURXZsh7Y I can accept order now but you need to

The following files and folders have been uploaded to the Files area of the [email protected] group. * /PIXIE2023/CPK-1 Pixie2023 Assembly Manual (Draft).pdf (

This blog shows the detail. https://mp.weixin./s/h7nkQAuqB0pQcVu1M0ixhg Thanks, Adam

I have fixed both issues with the following modification. 47 ohm and 2.2k ohm resistors are connected to the audio jacks. Thanks, Adam

For my Samsung Galaxy Tab A8, I met the following problems: * It cannot auto detect external mic, so the internal mic is always chosen. I have added 1k resistor in the mic port, but it does not help.

I will give it a try this weekend. Thanks. Thanks, Adam

I am using galaxy tab A with all my adx variants with ft8cn. There is no need for a sound card. A Y audio cable splitter from 4 pole to 2x 3 pole works fine. Something like this: AAOTOKK 3.5mm

Hi Mark, For myself i just use a 'Y' adaptor and plug straight into the phone. No sound card needed. It has a 4 pole plug 3.5mm at one end and 2 x 3.5mm female jacks at the other end. Make sure to

Mark, I bought a Samsung Tab A8, but it doesn’t work with FT8CN. Generally, an external sound card will be required to interface ADX-S to FT8CN on a phone or tablet. Thanks, Adam

Looking for guidance on how to interface the ADX-S with FT8CN running on a Samsung Galaxy Tab A. Part of my problem is that I'm not clear on whether I need an external soundcard device, such as the

This is the detailed report: https://mp.weixin./s/20hEhrbLRXGkU9LXvpAb2A Thanks, Adam