开云体育

The ir drivers in Crestron Database work fine and has discrete for power and input. I believe it worked with "Samsung Universal LCD/Plasma" driver, will probably work with the "Samsung UN Series"

Behavior is independent of whether or not you're utilizing favorites in the Sonos Modules / Media Player. It's inherent to the presence / quantity of Favorites in the Sonos system. The changes to how

It's not ridiculous to tell a customer that any specific thing can't be accessed through Crestron, because it's a 2-way street, and Crestron can't magically access certain features when the

Is there a Domotz in this project?

I used the LG 98LS95D a while back and had to do a firmware update for it to respond to the RS232 codes for multiscreen. The strings i used were Multi screen? ? ? ? ? ? xb 01 E2\x0D Split

I finally decided to bite the bullet and update to the 200.x databases and latest version of Simpl. So far I haven't encountered any major issues, but a couple of programs are generating the compiler

Hello, Not sure if it even exists.? Looking for smart tv commands for a Samsung over exlink.? One touch apps would be nice, but at least a smart hub/home button is necessary. To tell a customer that

Have you checked that you have the TV input set to enhanced HDMI? If you don't, and you send the TV a signal with HDR. It will cause that issue where you get sound and no video. And will cause the D30

Hi, Already tried this code. but it doesn't do the new features of LG tv with the multiview features. thanks,

It's right in the manual, but I happen to have it here (from a different model, can't imagine it would be different): tile on: dd 00 33\x0D tile off: dd 00 00\x0D

Hi All, I am working with QM-RMC and I am trying to send UDP command to a device. My controller IP is 192.168.4.x and the device IP is 239.0.0.200. Can someone tell me what configure settings do I

OK, thanks guys. It might well be an issue with the adapter, it?s a Prolific device. I?ve ordered a new FTDI-one. However, in the meantime, i dug out an older laptop with a physical RS232 port.

Dear All, I wonder if anyone did the integration for Schneider KNX lighting Control System through SpaceLynk LSS100200 using Bacnet/Ip?on the 3 series Control processor! I thought of using the

Hi, do you have HDCP fixed or auto? Especially with TV-boxes, setting it to a fixed value (1.4 or 2.2) made it a lot more stable. Cheers, Thorsten Von: [email protected] <[email protected]> Im

hi Brad that happeed to me too I don't remember how I solved that, but I remember I looked at the error log and did some changes in the program regards

Hi Guys, I have doubts regarding the errors that I have found in the error log of the control processor. These are the most common error I find * Error: CIPCommandProcessor.exe # 2020-10-07 19:47:44 #

OK, but where can I find a microSD card image?

The Box is Cisco RNG150N the remote didn't seem to have a "Menu" function that would work with the box off. Perhaps I will start another thread. Don't want to clog this one with unrelated issues.

Like Lincoln said, check verify it is assign to COM1 - COM4. On both Windows 7 and 10, search for and open the "device manager". Look under Ports (COM & LPT).? It should tell you what port the

It is possible to set a fixed resolution on an Xfinity cable box. On the X1 platform press Menu, settings, device preferences, video output. Choose a resolution you desire. On an older firmware box