开云体育

Yea I don't get it. Never met anyone that doesn't want all that pesky uptime on their systems haha. Maybe I could sort of understand if you didn't want it running 24/7 if you wanted to save

I will second what Gablerjohn said I went thru the exact same situation. But if your processor can ping the Lutron even sometimes, then its probably not going to be the license. The few times I had

With that router stuck in bootloader maybe try a firmware update?

Yea I did a recompile all on this one, and also have the latest databases. Was going to try deleting the SPIsWork folder today. Also saw on the FB group that backing down one DB version fixed it for

Installed two with IP control, no issues. Enable Simple IP control, check that Remote Start is enabled, and off you go. The panel is LG; software and video processing is all Sony. Serial is not

Hi Steve, Thanks for the input... I haven't had a chance to go though the code yet... planning to do that tommorra or the weekend.? Lost so many hours on this project, trying to kick a fast one out

Ok thanks Thanks , Mingo

I see it as more of a proud moment when the processor has had a very long uptime. When I see that it has a short up time I wonder why did it need to be rebooted, and is there something in my code that

“Not hard resetting for any issue related reason, I just want to reduce the runtime so that I do not have 180 days plus of uptime. My main objective is to just have my system uptime usually no more

I use the clock driver to astronomical clock, output feeds time offsets then one shots trigger the light(s). Technically I have some logic in between to determine the season because 30 min before

Hey guys , I do have a client that wants the outdoor lights to turn on 30mins before sunset Any idea on how to do this ? Thanks , Mingo

thanks dears for information I will generate a license for the processor but I do not have any license already to be deleted or do I need to delete something equipped with the processor. also I tried

I have an AV3 that is not communicating. No LAN light on the front but network activity on the port and on the network switch. I changed to DHCP and it is not acquiring an IP. Errlog reports the

I just RMA'd a AV3 because it would stop talking to Lutron.? Delete license, get a new one and everything was good for 6 months until it did it again.? Same fix as before.? They sent me an advanced

Anyone dealt with the new Sony Z Series Displays? I have tried CEC, IR (several drivers), RS232. nothing. Even other Sony tv remotes wouldn't control the tv (just power toggle, but no menu or other

Should not be too hard to fix.? Once you find the offending module open it, search for the variable LOCAL, and rename it to something else like LOCAL2.? Sometime in the past, LOCAL wasn't a reserved

BTW, the #2 needs to be there if you are using the latest update of the scheduler.

You need to also look at the .dat file.? There needs to be what appears to be an errant line at the very top,? #2, and the file MUST be in the NVRam folder on the processor and in the subfolder for

I've seen a couple of defective 4232CBMs, however if that were the case the older module wouldn't work. I'd suspect either the alarm panel's or the 4232CBM's firmware needs to be updated. I can't

Hello Evan, I have only one event in the .dat file to trigger the hard reset at 3am, I tried only Saturday’s, tried everyday and still nothing. I user text console to set time to a few minutes