开云体育

I'm very much not well versed in HTML5 interfaces myself either, but I think the process would be defining an XPanel 3.0 HTML5 touchpanel device in SIMPL (if you're using SIMPL), having the client's

just loaded the test pgm into my RMC4 - no splus error not sure about connecting to display, i'm home, display is at my daughters

Does any one have an IR driver for the Panasonic?DP-UB820. ?I wanted to check before I broke out the IR Learner. Thanks in advance, -Matt

I'm not an expert on this topic, but I've done some poking around and would be happy to know if I'm right/wrong/stupid/other. 1. Yes. HTML5/CSS3 is for everyone. ?The plugin is freely available in

Yeah, those missing method exceptions are most likely the problem and unsupported by the firmware would be a likely culprit, assuming the firmware is up to date (I think you already checked that). You

here is the log after it dumps all the parameters yes, i loaded a test pgm with just the CCD driver you can see that after 5 min is says 'connected', but is NOT 15674458::12/29/2020 3:42:30 PM::(7)

Interesting!!? I'll try it out and report back...

What model is the TV?? My understanding is that Samsung has used several different protocols and in some cases you have to set the port number or it won't work well (in my case that automatic port

Hi Mark, Same experience with 4.x driver and Samsung QN75Q80TAF I shut down all programs on end user MC3 and tried simplest Simpl program with only driver added and CCD test programs - same result.

What are y'all using besides IC Realtime?? Our clients do not like the app and no matter how many times we try to show the client how to use it, they ask why it can't be simple like Nest or Ring.? I

Do you have the id set on the ccd?

got WOL working on both drivers - stayed with the 4.x driver logging enabled starts up - all msgs look OK get "can't get power status" every minute 5 minutes later says connected, but not really 5

You could support KNX by using an extension device class, but it will only be a second class citizen to Crestron Home. For this kind of integration I think you should really lobby Crestron to have

Whenever I’m having issues getting an https or http command to work but I have a curl command that works fine I send the curl command to webhooks. https://webhook.site Then I can see the correct

I’ve tried everything with the https module. Does anyone have any advice on doing a curl command with https? Thanks

On the CP3 you can only use port #1, Ground to Ground, TX to the 485 (-) and RTS to the 485 (+) Do you have the correct wiring?

I am trying to fix an issue on an existing system with a CP3 and a Somfy SDN control via RS 485, we've troubleshooted all the paths of the signal and nothing seems to work from the CP3, but via RS485

So, I have a great client that employs a couple of developers for his business and has approached me about having them develop his personal ipad gui.? I don't even know enough to be dangerous at this

I reached out to Frank @ Dish and made him aware of the number of systems that were "broken" for me. As AVMaster mentioned, Dish is aware and working on finding a solution with Crestron. At the very

Hello, integrating some existing code in a secure installation, and i'm having an issue. The original codebase was using pre .200 database Cisco SX80 modules, and I've updated to use the RoomDevice