开云体育

Just in case anyone else runs into this issue, i have no resolved it with the correct code https://mirismanager.ubicast.eu/docs/miris/master/api.html#record Here is the API....

Not to sidetrack the intent of your question, but why not just configure as a Crestron Connected Display or use a Crestron Certified Driver? Almost any reputable commercial projector in this class is

Yes agree, I would but these are local and straight to the TV, not on DM. Will have to get IR control back to the processor if possible. This system is Pro2 with 418mhz gateways and ML600. No infiNET

Thank you so much. I was not aware of this database.

Not sure why there would be a 16 multicast stream limit for 2N.? Maybe there is some communication from the end point going back to the 2N.?? But at least the test multicast I have set up (using

Hello, I am a new dev to Crestron software and I have some basic questions about HTTPs requests! I am trying to send a url-encoded HTTPs POST request following

Port is 33336d.? Like Heather, I'm using the Sony UBP-X1000ES IP module to control 3 players in a project and it works fine.? In this particular project, I would know about it if it stopped working

Yes I’ve upgraded CP4N to 2.500 released on April 12, problem still there.

I was going to post a question about this. I would love to hear what solutions we might have for using IR with this new AppleTV, if this is more than a specific site issue... I was using CEC with

I've seen this issue on at least two PRO4s. There was a firmware update that was released on April 6th that I've updated our office PRO4 to after seeing the errors. Haven't seen the error again yet.

What IP port is used to communicate?

If you are using DM - use CEC, works flawlessly

Have 5th Gen Apple TV using Crestron Gen 4 IR driver and it is triple pulsing IR commands. Have never had this issue with this Crestron Gen 4 driver on either 2 or 3 series processor and DM systems.

Shane, Any recommendations on those bars?

Sorry, i should have mentioned were using DM_OutPut, not HDMI? In all installations. DM Output to Digital Link is how its wired; my CEC serial signals are only present on the DM Outputs CEC transmit

Looking at the link you gave, question #4 says its NOT CEC compatible.

Hi everyone, I was hoping someone can help me with this problem, I have a DMPS 350 that will not communicate via CEC with a Panasonic Projector?? I have a exact setup in other boardrooms using a

Hi All, Having some issues with controlling an Ubicast Miris Plus lecture capture. rs232 is enabled and the commands are the same commands that work in another room. I've never had to set one up from

I asked 2N about the exact scenario the OP is dealing with, and they also said to use the "DOOR_STATION" string as the stream URL.? This supposedly uses the embedded video stream of the incoming SIP

Hi Sébastien, that looks like a very interesting device, thanks for posting. Since the customer has KNX installed as well, this might be an option. I?ll have a closer look. Cheers, Thorsten Von: